Ultrasonic wave propagation in deteriorated concrete structures was studied numerically and experimentally. Ultrasonic single-side access immersion pulse-echo and diffuse field measurements were performed in deteriorated concrete structures at 0.5 MHz center frequency. Numerically and experimentally it is shown that the undamaged layer thickness in a deteriorated concrete structure is measurable using pulse-echo measurements when the deterioration depth is larger than the wavelength. The signal overlapping, which occurs in the thin deteriorated layers, can be overcome using diffuse field measurements or a pattern matching technique. The ultrasonic experimental data were shown to be in good agreement with the widely used phenolphthalein test...
Ultrasonic testing is a non-destructive approach commonly used to evaluate concrete structures. A ch...
The main objective of this research is to investigate the applicability of diffuse ultrasound to the...
In an embedded guided wave system, energy gets leaked out into the embedding material as bulk waves....
Ultrasonic wave propagation in deteriorated concrete structures was studied numerically and experime...
Tests were performed to evaluate the feasibility of using Ultrasonic Pulse Velocity Method (UPVM) in...
Tests were performed to evaluate the feasibility of using Ultrasonic Pulse Velocity Method (UPVM) in...
PDFTech Reporthttp://www.virginiadot.org/vtrc/main/online_reports/pdf/14-r8.pdfFHWA/VCTIR 14-R899207...
Although the technique of using ultrasound has reached maturity by given the extent of the developme...
In this study, we investigated the suitability of applying air-coupled ultrasonic diffuse-wave techn...
The use of ultrasonic technique for detection of internal flaw and delamination in concrete structur...
The in-situ testing of early age concrete strength is crucial for determining the time of form remov...
Structural health monitoring systems for civil structures based on ultrasonic guided waves face the ...
An ultrasonic pulse velocity (UPV) test is often applied to determine the quality of concrete struct...
Concrete cover degradation is induced by aggressive agents in ambiance, chemicals, moisture, or temp...
From the many non-destructive testing methods, this contribution covers main streams of research and...
Ultrasonic testing is a non-destructive approach commonly used to evaluate concrete structures. A ch...
The main objective of this research is to investigate the applicability of diffuse ultrasound to the...
In an embedded guided wave system, energy gets leaked out into the embedding material as bulk waves....
Ultrasonic wave propagation in deteriorated concrete structures was studied numerically and experime...
Tests were performed to evaluate the feasibility of using Ultrasonic Pulse Velocity Method (UPVM) in...
Tests were performed to evaluate the feasibility of using Ultrasonic Pulse Velocity Method (UPVM) in...
PDFTech Reporthttp://www.virginiadot.org/vtrc/main/online_reports/pdf/14-r8.pdfFHWA/VCTIR 14-R899207...
Although the technique of using ultrasound has reached maturity by given the extent of the developme...
In this study, we investigated the suitability of applying air-coupled ultrasonic diffuse-wave techn...
The use of ultrasonic technique for detection of internal flaw and delamination in concrete structur...
The in-situ testing of early age concrete strength is crucial for determining the time of form remov...
Structural health monitoring systems for civil structures based on ultrasonic guided waves face the ...
An ultrasonic pulse velocity (UPV) test is often applied to determine the quality of concrete struct...
Concrete cover degradation is induced by aggressive agents in ambiance, chemicals, moisture, or temp...
From the many non-destructive testing methods, this contribution covers main streams of research and...
Ultrasonic testing is a non-destructive approach commonly used to evaluate concrete structures. A ch...
The main objective of this research is to investigate the applicability of diffuse ultrasound to the...
In an embedded guided wave system, energy gets leaked out into the embedding material as bulk waves....