An investigation of the use of radioactive isotopes for determining the surface area of powdered materials

Utilization of radioactive isotopes in coal process research : final report - task 1 /

Yavorsky, P. M.
Gorin, E.
Consolidation Coal Company.
U.S. Atomic Energy Commission. New York Operations Office.
U.S. Atomic Energy Commission. Division of Isotopes Development.

"March 1, 1959 - March 31, 1960.""Contract No. AT(30-1)-2350, April 30, 1960."Includes bibliographic...

DEVELOPMENT OF PLUTONIUM BEARING FUEL MATERIALS. Monthly Progress Letter for Month of August 1961

Puechl, K.H.

September 1961

Surface area measurements on UO/sub 2/-PuO/sub 2/ and PuO/sub 2/ powders are reported. Fabrication a...

Radioactive method enables determination of surface areas rapidly and accurately

Roll, J. A.
Sunday, J.
Rymer, G. T.
Roesmer, J.

December 1966

Radioactive krypton adsorption technique is used to determine the surface area of more than one samp...

An investigation of the use of radioactive isotopes for determining the surface area of powdered materials by sorption methods /

Kordecki, Margaret C.
Gandy, Miriam B.
U.S. Atomic Energy Commission. Savannah River Operations Office.
U.S. Atomic Energy Commission.
Georgia Institute of Technology. Engineering Experiment Station.

January 1961

Covering the period 1 April 1959 to 31 March 1961."SRO-55.""Final report, Project no. A-446-3 ... Co...

Radio-isotopes development program

Whitley, Wyatt C.

January 1959

Issued as final reportIssued as Special progress letter no. 1, Project no. A-446

Studies on Analytical Methods for Trace Elements in Metals by Using Radioactive Isotopes. VI : The Analytical Method for Radioactive Nuclides Contaminating the Surface of Several Metals

AMANO, Hiroshi

January 2010

application/pdfThe analytical methods for radioactive nuclides which contaminated the metallic surfa...

Separation of isotopes by flow through powder packs with high ratio of surface area to void volume /

Trawick, W. C.
Berman, A. S.
Union Carbide Nuclear Company.
U.S. Atomic Energy Commission.
Oak Ridge Gaseous Diffusion Plant.

January 1956

K-1236" ... for the Atomic Energy Commission acting under U.S. government contract W7405 eng 26"--Co...

MOUND LABORATORY MONTHLY PROGRESS REPORT FOR MAY 1961 ON PLASTICS, RADIOELEMENTS, ISOTOPE SEPARATION, AND REACTOR FUELS

Eichelberger, J.F.

May 1961

tems were cast and cured. Results of chemical tests on aa epoxy curlang exudate are included. Compar...

Analytical methods for fissionable material determinations in the nuclear fuel cycle. Progress report, October 1, 1978-September 30, 1979

Waterbury, G.R. (comp.)

March 1980

Work continues on the development of dissolution techniques for difficult-to-dissolve nuclear materi...

Measurement of surface area of uranium dioxide powder and sintered pellets /

Smith, T.
North American Aviation. Atomics International Division.
U.S. Atomic Energy Commission.

"Contract: AT(11-1)-GEN-8 ; Issued: October 1, 1960.""NAA-SR-5319 ; Metallurgy and Ceramics."Include...

Determination of the surface area of uranium compounds of different particle sizes by low-temperature van der Waals adsorption of ethane /

Lauterbach, Kenneth.
Leach, Leonard.
Laskin, Sidney.
University of Rochester.
U.S. Atomic Energy Commission.

January 1949

Work performed at the University of Rochester."Date Declassified: August 31, 1948."Includes bibliogr...

Analytical methods for fissionable material determinations in the nuclear fuel cycle. Progress report, October 1, 1976--September 30, 1977

Waterbury, G.R. (comp.)

January 1978

Development of dissolution techniques for difficult-to-dissolve nuclear materials, development of me...

PROGRESS RELATING TO CIVILIAN APPLICATIONS DURING MARCH 1959

Dayton, R.W.
Tipton, C.R. Jr.

April 1959

S>In the program on the use of radioisotopes for quslity control in the cement industry, experiments...

A REVIEW OF APPLICATIONS OF RADIOISOTOPES TO ENGINEERING

J. L. Putman

January 1173

Radioisotopes are radioactive versions of the natural chemical elements, differing from these only i...

Study of the industrial potential of radioisotopic methods in the synthetic detergent and soap industry : final report, March 1-November 30, 1959 /

Stanley, Charles W.
Midwest Research Institute (Kansas City, Mo.)
U.S. Atomic Energy Commission. Office of Isotopes Development.

"September 1960 [OTI Extension Issuance Date]"--Cover."TID-6088 ; Isotopes--Industrial Technology"--...

Utilization of radioactive isotopes in coal process research : final report - task 1 /

Yavorsky, P. M.
Gorin, E.
Consolidation Coal Company.
U.S. Atomic Energy Commission. New York Operations Office.
U.S. Atomic Energy Commission. Division of Isotopes Development.

"March 1, 1959 - March 31, 1960.""Contract No. AT(30-1)-2350, April 30, 1960."Includes bibliographic...

DEVELOPMENT OF PLUTONIUM BEARING FUEL MATERIALS. Monthly Progress Letter for Month of August 1961

Puechl, K.H.

September 1961

Surface area measurements on UO/sub 2/-PuO/sub 2/ and PuO/sub 2/ powders are reported. Fabrication a...

Radioactive method enables determination of surface areas rapidly and accurately

Roll, J. A.
Sunday, J.
Rymer, G. T.
Roesmer, J.

December 1966

Radioactive krypton adsorption technique is used to determine the surface area of more than one samp...

An investigation of the use of radioactive isotopes for determining the surface area of powdered materials by sorption methods /

Kordecki, Margaret C.
Gandy, Miriam B.
U.S. Atomic Energy Commission. Savannah River Operations Office.
U.S. Atomic Energy Commission.
Georgia Institute of Technology. Engineering Experiment Station.

January 1961

Covering the period 1 April 1959 to 31 March 1961."SRO-55.""Final report, Project no. A-446-3 ... Co...

Radio-isotopes development program

Whitley, Wyatt C.

January 1959

Issued as final reportIssued as Special progress letter no. 1, Project no. A-446

Studies on Analytical Methods for Trace Elements in Metals by Using Radioactive Isotopes. VI : The Analytical Method for Radioactive Nuclides Contaminating the Surface of Several Metals

AMANO, Hiroshi

January 2010

application/pdfThe analytical methods for radioactive nuclides which contaminated the metallic surfa...

Separation of isotopes by flow through powder packs with high ratio of surface area to void volume /

Trawick, W. C.
Berman, A. S.
Union Carbide Nuclear Company.
U.S. Atomic Energy Commission.
Oak Ridge Gaseous Diffusion Plant.

January 1956

K-1236" ... for the Atomic Energy Commission acting under U.S. government contract W7405 eng 26"--Co...

MOUND LABORATORY MONTHLY PROGRESS REPORT FOR MAY 1961 ON PLASTICS, RADIOELEMENTS, ISOTOPE SEPARATION, AND REACTOR FUELS

Eichelberger, J.F.

May 1961

tems were cast and cured. Results of chemical tests on aa epoxy curlang exudate are included. Compar...

Analytical methods for fissionable material determinations in the nuclear fuel cycle. Progress report, October 1, 1978-September 30, 1979

Waterbury, G.R. (comp.)

March 1980

Work continues on the development of dissolution techniques for difficult-to-dissolve nuclear materi...

Measurement of surface area of uranium dioxide powder and sintered pellets /

Smith, T.
North American Aviation. Atomics International Division.
U.S. Atomic Energy Commission.

"Contract: AT(11-1)-GEN-8 ; Issued: October 1, 1960.""NAA-SR-5319 ; Metallurgy and Ceramics."Include...

Determination of the surface area of uranium compounds of different particle sizes by low-temperature van der Waals adsorption of ethane /

Lauterbach, Kenneth.
Leach, Leonard.
Laskin, Sidney.
University of Rochester.
U.S. Atomic Energy Commission.

January 1949

Work performed at the University of Rochester."Date Declassified: August 31, 1948."Includes bibliogr...

Analytical methods for fissionable material determinations in the nuclear fuel cycle. Progress report, October 1, 1976--September 30, 1977

Waterbury, G.R. (comp.)

January 1978

Development of dissolution techniques for difficult-to-dissolve nuclear materials, development of me...

PROGRESS RELATING TO CIVILIAN APPLICATIONS DURING MARCH 1959

Dayton, R.W.
Tipton, C.R. Jr.

April 1959

S>In the program on the use of radioisotopes for quslity control in the cement industry, experiments...

A REVIEW OF APPLICATIONS OF RADIOISOTOPES TO ENGINEERING

J. L. Putman

January 1173

Radioisotopes are radioactive versions of the natural chemical elements, differing from these only i...

Study of the industrial potential of radioisotopic methods in the synthetic detergent and soap industry : final report, March 1-November 30, 1959 /

Stanley, Charles W.
Midwest Research Institute (Kansas City, Mo.)
U.S. Atomic Energy Commission. Office of Isotopes Development.

"September 1960 [OTI Extension Issuance Date]"--Cover."TID-6088 ; Isotopes--Industrial Technology"--...

Utilization of radioactive isotopes in coal process research : final report - task 1 /

Yavorsky, P. M.
Gorin, E.
Consolidation Coal Company.
U.S. Atomic Energy Commission. New York Operations Office.
U.S. Atomic Energy Commission. Division of Isotopes Development.

"March 1, 1959 - March 31, 1960.""Contract No. AT(30-1)-2350, April 30, 1960."Includes bibliographic...

DEVELOPMENT OF PLUTONIUM BEARING FUEL MATERIALS. Monthly Progress Letter for Month of August 1961

Puechl, K.H.

September 1961

Surface area measurements on UO/sub 2/-PuO/sub 2/ and PuO/sub 2/ powders are reported. Fabrication a...

Radioactive method enables determination of surface areas rapidly and accurately

Roll, J. A.
Sunday, J.
Rymer, G. T.
Roesmer, J.

December 1966

Radioactive krypton adsorption technique is used to determine the surface area of more than one samp...

An investigation of the use of radioactive isotopes for determining the surface area of powdered materials

Abstract

Extracted data

An investigation of the use of radioactive isotopes for determining the surface area of powdered materials

Abstract

Extracted data

Related items

Related items