In this paper an attempt has been made to evaluate the spatial variability of the depth of weathered and engineering bedrock in Bangalore, south India using Multichannel Analysis of Surface Wave (MASW) survey. One-dimensional MASW survey has been carried out at 58 locations and shear-wave velocities are measured. Using velocity profiles, the depth of weathered rock and engineering rock surface levels has been determined. Based on the literature, shear-wave velocity of 330 ± 30 m/s for weathered rock or soft rock and 760 ± 60 m/s for engineering rock or hard rock has been considered. Depths corresponding to these velocity ranges are evaluated with respect to ground contour levels and top surface levels have been mapped with an interpolation ...
Mapping the shear wave velocity profile is an important part in seismic hazard and microzonation stu...
Knowing the depth to bedrock is important in designing and constructing foundations for buildings an...
The study was to characterize the sub surface at Agere in Ekori, using seismic refraction method, mu...
Mapping surficial and subsurface conditions play an important role in analysis and design of geotech...
A number of geophysical methods have been proposed for near-surface site characterization and measur...
ABSTRACT: A number of geophysical methods have been proposed for near-surface site characterization ...
Detection of bedrock depth is one of the critical site investigation procedures for seismic hazard a...
Abstract It has now been well established that the depth of bedrock is a key parameter in assessing ...
Conventional techniques such as boreholes and test pits have been used for geotechnical site investi...
A study of surface-wave analysis can be divided into two main parts. In the first stage, dispersive ...
Tyt. z nagłówka.First introduced and developed in the 1990s, the multichannel analysis of surface wa...
Shear-wave velocity (Vs) as a function of soil stiffness is an essential parameter in geotechnical c...
Properties of the soil from the bedrock is necessary to describe accurately and reliably for the red...
Properties of the soil from the bedrock is necessary to describe accurately and reliably for the red...
Study of seismic hazard and site response are essential and has become mandatory for the design of i...
Mapping the shear wave velocity profile is an important part in seismic hazard and microzonation stu...
Knowing the depth to bedrock is important in designing and constructing foundations for buildings an...
The study was to characterize the sub surface at Agere in Ekori, using seismic refraction method, mu...
Mapping surficial and subsurface conditions play an important role in analysis and design of geotech...
A number of geophysical methods have been proposed for near-surface site characterization and measur...
ABSTRACT: A number of geophysical methods have been proposed for near-surface site characterization ...
Detection of bedrock depth is one of the critical site investigation procedures for seismic hazard a...
Abstract It has now been well established that the depth of bedrock is a key parameter in assessing ...
Conventional techniques such as boreholes and test pits have been used for geotechnical site investi...
A study of surface-wave analysis can be divided into two main parts. In the first stage, dispersive ...
Tyt. z nagłówka.First introduced and developed in the 1990s, the multichannel analysis of surface wa...
Shear-wave velocity (Vs) as a function of soil stiffness is an essential parameter in geotechnical c...
Properties of the soil from the bedrock is necessary to describe accurately and reliably for the red...
Properties of the soil from the bedrock is necessary to describe accurately and reliably for the red...
Study of seismic hazard and site response are essential and has become mandatory for the design of i...
Mapping the shear wave velocity profile is an important part in seismic hazard and microzonation stu...
Knowing the depth to bedrock is important in designing and constructing foundations for buildings an...
The study was to characterize the sub surface at Agere in Ekori, using seismic refraction method, mu...