Add to ORKGWe have slid steel pins on aluminium-silicon alloy discs in the boundary lubrication regime in the presence of one drop of oil. We have explored the effect of base oil and additivated engine oil on friction and wear and analyzed the data in terms of the formation of a mechanically mixed layer at the interface and the corrosive action of additive addition
When various sliding components of combustion engines protected with hard coatings are slid with aut...
International audienceThe paper describes an experimental investigation of the tribology during plan...
Lightweight aluminium-silicon alloy is an attractive material for making engine cylinders in automob...
We have slid steel pins on aluminium-silicon alloy discs in the boundary lubrication regime in the p...
The lubrication mechanism of aluminium alloy slid against steel was investigated from the standpoint...
Aluminium-silicon alloy, an important material used for the construction of internal combustion engi...
Aluminium-silicon alloy, an important material used for the construction of internal combustion engi...
Pin on disc wear machines were used to study the boundary lubricated friction and wear of AISI 52100...
The present paper describes the elemental composition of secondary structures formed on the contact ...
Aluminium silicon alloy has been found to be advantageous in many automobile components like piston...
The primary friction mechanism between boundary-lubricated sliding surfaces was investigated. Experi...
Ensuring effective lubrication between sliding surfaces is one of the challenges in the field of tri...
Even though research into aluminium-silicon alloys is becoming increasingly fashionable, very little...
Ensuring effective lubrication between sliding surfaces is one of the challenges in the field of tri...
This study was initiated with the aim to assess the influence of boundary films on the tribologicall...
When various sliding components of combustion engines protected with hard coatings are slid with aut...
International audienceThe paper describes an experimental investigation of the tribology during plan...
Lightweight aluminium-silicon alloy is an attractive material for making engine cylinders in automob...
We have slid steel pins on aluminium-silicon alloy discs in the boundary lubrication regime in the p...
The lubrication mechanism of aluminium alloy slid against steel was investigated from the standpoint...
Aluminium-silicon alloy, an important material used for the construction of internal combustion engi...
Aluminium-silicon alloy, an important material used for the construction of internal combustion engi...
Pin on disc wear machines were used to study the boundary lubricated friction and wear of AISI 52100...
The present paper describes the elemental composition of secondary structures formed on the contact ...
Aluminium silicon alloy has been found to be advantageous in many automobile components like piston...
The primary friction mechanism between boundary-lubricated sliding surfaces was investigated. Experi...
Ensuring effective lubrication between sliding surfaces is one of the challenges in the field of tri...
Even though research into aluminium-silicon alloys is becoming increasingly fashionable, very little...
Ensuring effective lubrication between sliding surfaces is one of the challenges in the field of tri...
This study was initiated with the aim to assess the influence of boundary films on the tribologicall...
When various sliding components of combustion engines protected with hard coatings are slid with aut...
International audienceThe paper describes an experimental investigation of the tribology during plan...
Lightweight aluminium-silicon alloy is an attractive material for making engine cylinders in automob...