Exterior mounting of the pellet burner to existing fuel oil boilers

V Sloveniji je biomasa ekološka, trajnostna in ekonomsko zanimiva oblika ogrevanja. Zato želijo lastniki kotla na kurilno olje zaradi ekonomske računice kotel pogosto predelati za kurjenje na industrijske pelete. Če v tak kotel normalno montiramo peletni gorilnik, pride do povratnega udara plamena in s tem do pregorevanja stene plamene cevi gorilnika ter do slabega izkoristka kotla. Opisan problem rešimo z enostavno zunanjo montažo peletnega gorilnika s posebno izvedbo puše z vratci. Za še boljšo rešitev tega problema je mogoče izdelati simulacijo in/ali realistično meritev, da bi lahko imeli bolj idealno obliko plamena, povečanje učinkovitosti zgorevanja, merjenje razmernika zraka λ in druge parametre.In Slovenia, the biomass is an ecological, sustainable and economically interesting form of heating. Therefore, the owners of the oil boiler often want, due to economic calculation, to renovate the existing boiler for firing with industrial pellets. If a pellet burner is normally installed in such a boiler, the flame reflects from the wall and burns the wall of the nozzle and consequently the boiler operates at lower efficiency. This problem can be solved by simple exterior mounting of a pellet burner with a special version of the bushing with a door. For further work of an even better solution to this problem, it is possible to produce a simulation and/or a realistic measurement for obtaining an ideal flame, increasing the efficiency of combustion, measuring λ and other parameters