Wireless multi-carrier communication system design and implementation using a custom hardware and software FPGA platform

Field Programmable Gate Array (FPGA) devices and high-level hardware development languages represent a new and exciting addition to traditional research tools, where simulation models can be evaluated by the direct implementation of complex algorithms and processes. Signal processing functions that are based on well known and standardised mathematical operations, such as Fast Fourier Transforms (FFTs), are well suited for FPGA implementation. At UCL, research is on-going on the design, modelling and simulation of Frequency Division Multiplexing (FDM) techniques such as Spectrally E - cient Frequency Division Multiplexing (SEFDM) which, for a given data rate, require less bandwidth relative to equivalent Orthogonal Frequency Division Multiplexing (OFDM). SEFDM is based around standard mathematical functions and is an ideal candidate for FPGA implementation. The aim of the research and engineering work reported in this thesis is to design and implement a system that generates SEFDM signals for the purposes of testing and veri cation, in real communication environments. The aim is to use FPGA hardware and Digital to Analogue Converters (DACs) to generate such signals and allow recon gurability using standard interfaces and user friendly software. The thesis details the conceptualisation, design and build of an FPGA-based wireless signal generation platform. The characterisation applied to the system, using the FPGA to drive stimulus signals is reported and the thesis will include details of the FPGA encapsulation of the minimum protocol elements required for communication (of control signals) over Ethernet. Detailed testing of the hardware is reported, together with a newly designed in the loop testing methodology. Veri ed test results are also reported with full details of time and frequency results as well as full FPGA design assessment. Altogether, the thesis describes the engineering design, construction and testing of a new FPGA hardware and software system for use in communication test scenarios, controlled over Ethernet