Thermoeconomic and thermoenvironomic modeling and analysis of selected gas turbine power plants in Nigeria

This study presents comprehensive thermoeconomic and thermoenvironomic modeling and analysis of selected gas turbine power plants in Nigeria using the first and second laws of thermodynamics (exergy) concept. Exergetic analysis was conducted using operating data obtained from the power plants to determine the exergy destruction and exergy efficiency of each major component of the gas turbine in each power plant. The results of the study showed that the combustion chamber (CC) is the most exergy destructive component compared to other cycle components. The percentage of exergy destruction in CC varies between 86.05% and 94.6%. By increasing the gas turbine inlet temperature (GTIT), the exergy destruction of this component can be reduced. The total exergy improvement potential of the selected plants varies from 54.04 to 159.88 MW. The component with the highest exergy improvement potential is the CC, which has the value that varies from 30.21 to 88.86 MW. Thermoeconomic analysis showed that the cost of exergy destruction is high in the CC, and an increase in the GTIT effectively decreases this cost. The exergy costing analysis revealed that the unit cost of electricity produced in the plants ranged from cents 1.99/kWh (N3.16/ kWh) to cents 5.65 /kWh (N8.98/kWh). Thermoenvironomic analysis showed that the CO2 emissions varied between 100.18 and 408.78 kg CO2/MWh, while cost rate of environmental impact varied from 40.18 $/h (6, 388.62 N/h) to 276.97 $/h (44, 038. 23 N/h). The results further showed that CO2 emissions and cost of environmental impact decrease with increasing GTIT. The sustainability index increase with increasing GTIT. Finally, this study will assist efforts to understand the thermodynamic losses in the gas turbine cycle, and to improve efficiency as well as provide future recommendations for better performance, sustainability, and lessening environmental impact of power plant