Linking the mechanics and energetics of hopping with elastic ankle exoskeletons

This is the author accepted manuscript. The final version is available from the American Physiological Society via the DOI in this recordThe corrigendum to this article is in ORE at: http://hdl.handle.net/10871/34527The springlike mechanics of the human leg during bouncing gaits has inspired the design of passive assistive devices that use springs to aid locomotion. The purpose of this study was to test whether a passive spring-loaded ankle exoskeleton could reduce the mechanical and energetic demands of bilateral hopping on the musculoskeletal system. Joint level kinematics and kinetics were collected with electromyographic and metabolic energy consumption data for seven participants hopping at four frequencies (2.2, 2.5, 2.8, and 3.2 Hz). Hopping was performed without an exoskeleton; with an springless exoskeleton; and with a spring-loaded exoskeleton. Spring-loaded ankle exoskeletons reduced plantar flexor muscle activity and the biological contribution to ankle joint moment (15-25%) and average positive power (20-40%). They also facilitated reductions in metabolic power (15-20%) across frequencies from 2.2 to 2.8 Hz compared with hopping with a springless exoskeleton. Reductions in metabolic power compared with hopping with no exoskeleton were restricted to hopping at 2.5 Hz only (12%). These results highlighted the importance of reducing the rate of muscular force production and work to achieve metabolic reductions. They also highlighted the importance of assisting muscles acting at the knee joint. Exoskeleton designs may need to be tuned to optimize exoskeleton mass, spring stiffness, and spring slack length to achieve greater metabolic reductions