Balancing of Network Energy using Observer Approach

Efficient energy use is primarily for any sensor networks to function for a longer time period. There have been many efficient schemes with various progress levels proposed by many researchers. Yet, there still more improvements are needed. This thesis is an attempt to make wireless sensor networks with further efficient on energy usage in the network with respect to rate of delivery of the messages. In sensor network architecture radio, sensing and actuators have influence over the power consumption in the entire network. While listening as well as transmitting, energy is consumed by the radio. However, if by reducing listening times or by reducing the number of messages transmitting would reduce the energy consumption. But, in real time scenario with critical information sensing network leads to information loss. To overcome this an adaptive routing technique should be considered. So, that it focuses on saving energy in a much more sophisticated way without reducing the performance of the sensing network transmitting and receiving functionalities. This thesis tackles on parts of the energy efficiency problem in a wireless sensor network and improving delivery rate of messages. To achieve this a routing technique is proposed. In this method, switching between two routing paths are considered and the switching decision taken by the server based on messages delivered comparative previous time intervals. The goal is to get maximum network life time without degrading the number of messages at the server. In this work some conventional routing methods are considered for implementing an approach. This approach is by implementing a shortest path, Gradient based energy routing algorithm and an observer component to control switching between paths. Further, controlled switching done by observer compared to normal initial switch rule. Evaluations are done in a simulation environment and results show improvement in network lifetime in a much more balanced way