<p>A passively Q-switched mode-locked Nd: YAG laser with a reflective molybdenum disulfide (MoS2) saturable absorber (SA) was demonstrated. The MoS2 SA was made by spin-coating the MoS2 nanoplates onto a home-made silver mirror. The modulation depth of the MoS2 SA was measured to be 3.05%. We optimized the laser beam radii in the crystal and on the reflective silver mirror with MoS2 by accurately designing the oscillator cavity. Under an incident pump power of 11 W, we got the maximum average output power as high as 1.06 W with a repetition rate of 94.72 MHz. The experimental results validated the outstanding characteristics of MoS2 SA and its further amplification possibility in high power all-solid-state pulse lasers. (C) 2018 Elsevier Lt...
We experimentally demonstrate a passive, stable and low cost Q-switched erbium-doped fiber laser bas...
Due to the extremely high pulse peak power produced by ultrafast laser and its potential application...
In this letter, a molybdenum disulfide (MoS2) saturable absorber (SA) is fabricated using a simple d...
This study presents a passively Q-switched Nd:YAG laser using a MoS2 solution as a saturable absorbe...
<p> The passively Q-switched Er: YAG laser at 1.6 mu m was achieved with a YAG-based MoS2 saturable...
National Natural Science Foundation of China [61475088, 61475177, 51302285, 61522510]; Open Foundati...
using a multi-layered molybdenum disufide (MoS2) as a Saturable Absorber (SA). The MoS2 film was obt...
<p> In this work, we report a passively Q-switched Nd:YAG laser at 1064 nm by using WS2 solution as...
A molybdenum disulfide (MoS2) saturable absorber (SA) solution is fabricated by liquid-phase exfolia...
A passively Q-switched Ytterbium-doped fiber laser (YDFL) based on MoS2 saturable absorber (SA) is d...
<p> We report on a nanosecond pulse generation in a diode end-pumped passively Q-switched Nd: YVO4 ...
A Q-switched Erbium-Ytterbium co-doped fiber laser (EYDFL) with cladding pumping system is demonstra...
A Q-switched fiber laser based on a Molybdenum disulfide (MoS2) saturable absorber (SA) is proposed ...
Pulse width of pulsed laser determinates their applications. For the long pulse laser with µs or ns ...
Passive Q-switching or mode-locking by placing a saturable absorber inside the laser cavity is one o...
We experimentally demonstrate a passive, stable and low cost Q-switched erbium-doped fiber laser bas...
Due to the extremely high pulse peak power produced by ultrafast laser and its potential application...
In this letter, a molybdenum disulfide (MoS2) saturable absorber (SA) is fabricated using a simple d...
This study presents a passively Q-switched Nd:YAG laser using a MoS2 solution as a saturable absorbe...
<p> The passively Q-switched Er: YAG laser at 1.6 mu m was achieved with a YAG-based MoS2 saturable...
National Natural Science Foundation of China [61475088, 61475177, 51302285, 61522510]; Open Foundati...
using a multi-layered molybdenum disufide (MoS2) as a Saturable Absorber (SA). The MoS2 film was obt...
<p> In this work, we report a passively Q-switched Nd:YAG laser at 1064 nm by using WS2 solution as...
A molybdenum disulfide (MoS2) saturable absorber (SA) solution is fabricated by liquid-phase exfolia...
A passively Q-switched Ytterbium-doped fiber laser (YDFL) based on MoS2 saturable absorber (SA) is d...
<p> We report on a nanosecond pulse generation in a diode end-pumped passively Q-switched Nd: YVO4 ...
A Q-switched Erbium-Ytterbium co-doped fiber laser (EYDFL) with cladding pumping system is demonstra...
A Q-switched fiber laser based on a Molybdenum disulfide (MoS2) saturable absorber (SA) is proposed ...
Pulse width of pulsed laser determinates their applications. For the long pulse laser with µs or ns ...
Passive Q-switching or mode-locking by placing a saturable absorber inside the laser cavity is one o...
We experimentally demonstrate a passive, stable and low cost Q-switched erbium-doped fiber laser bas...
Due to the extremely high pulse peak power produced by ultrafast laser and its potential application...
In this letter, a molybdenum disulfide (MoS2) saturable absorber (SA) is fabricated using a simple d...