In order to explore a method to remove particulate matter, catalysts of different alkaline nitrates (Li, K and Cs) supported on hydrous zirconium were prepared by the method of incipient humidity and tested as catalysts for particulate matter combustion. The catalytic activity was determined by using the temperature programmed oxidation technique (TPO), utilizing two equipments, a thermogravimetric reactor and other of fixed bed. In the first case the particulate matter/catalyst mixture was milled carefully in a mortar (tight contact) while in the second case more realistic operative conditions were used, particulate matter/catalyst mixture was made with a spatula (loose contact). All prepared catalysts showed good activity for the particul...
Soot particles and nitrogen oxides are the main pollutants emitted by a diesel engine. In this work,...
AbstractThe effect of incorporating alkaline nitrates in hydrotalcites for use in the combustion of ...
The aim of this work was to study the Co,Ba,K/ZrO2 catalyst for the removal of the most important po...
The catalytic combustion of particulate material was studied on cobalt catalysts promoted with potas...
The diesel soot combustion was studied using catalysts prepared by impregnation with cesium nitrate ...
The deactivation of supported catalysts CsNO3 and LiNO3 for diesel soot combustion is studied in thi...
KNO3/ZrO2 and KOH/ZrO2 catalysts were studied and found active in the catalytic soot combustion. Two...
Catalysts containing 0.25–20% KNO3 supported on ZrO2 have been studied for diesel soot combustion. T...
An alumina foam has been coated with a thin layer of ZrO2 by washcoating and impregnated with Co, Ba...
This work analyzes the application of a ceramic paper to the diesel soot combustion reaction in air....
The catalytic combustion of diesel soot was studied in the presence of fresh and aged catalysts: Co/...
In this work, a series of Cu-Mg-Al hydrotalcites and the oxide mixture obtained by their calcination...
K and Co,K supported catalysts were studied to determine the mechanism of the soot combustion. The t...
Soot combustion is a highly exothermic reaction. The aim of this work is to demonstrate that catalys...
The effect of incorporating alkaline nitrates in hydrotalcites for use in the combustion of particul...
Soot particles and nitrogen oxides are the main pollutants emitted by a diesel engine. In this work,...
AbstractThe effect of incorporating alkaline nitrates in hydrotalcites for use in the combustion of ...
The aim of this work was to study the Co,Ba,K/ZrO2 catalyst for the removal of the most important po...
The catalytic combustion of particulate material was studied on cobalt catalysts promoted with potas...
The diesel soot combustion was studied using catalysts prepared by impregnation with cesium nitrate ...
The deactivation of supported catalysts CsNO3 and LiNO3 for diesel soot combustion is studied in thi...
KNO3/ZrO2 and KOH/ZrO2 catalysts were studied and found active in the catalytic soot combustion. Two...
Catalysts containing 0.25–20% KNO3 supported on ZrO2 have been studied for diesel soot combustion. T...
An alumina foam has been coated with a thin layer of ZrO2 by washcoating and impregnated with Co, Ba...
This work analyzes the application of a ceramic paper to the diesel soot combustion reaction in air....
The catalytic combustion of diesel soot was studied in the presence of fresh and aged catalysts: Co/...
In this work, a series of Cu-Mg-Al hydrotalcites and the oxide mixture obtained by their calcination...
K and Co,K supported catalysts were studied to determine the mechanism of the soot combustion. The t...
Soot combustion is a highly exothermic reaction. The aim of this work is to demonstrate that catalys...
The effect of incorporating alkaline nitrates in hydrotalcites for use in the combustion of particul...
Soot particles and nitrogen oxides are the main pollutants emitted by a diesel engine. In this work,...
AbstractThe effect of incorporating alkaline nitrates in hydrotalcites for use in the combustion of ...
The aim of this work was to study the Co,Ba,K/ZrO2 catalyst for the removal of the most important po...