Add to ORKGCarbon fibres/particles can be satisfactory reinforcing material in polymer, ceramic and metal matrices. Carbon fibres/particles reinforced polymer matrix composites and ceramic matrix composites are being used extensively in critical areas of application, but carbon fibre - metal matrix composites have not reached that stage yet. This paper discusses the salient aspects of production and specific properties of carbon fibre/particle reinforced cast metal matrix composites. It is envisaged that these materials will find extensive applications where cost, weight and thermal expansion are the key factors
Carbon Composites: Composites with Carbon Fibers, Nanofibers, and Nanotubes, Second Edition, provide...
Carbon fibers have specific characteristics in comparison with industrial and structural materials u...
Al-, Zn-, and Cu-based matrix composites reinforced with continuous fibres of carbon, SiC, Al2O3, or...
Carbon fibres/particles can be satisfactory reinforcing material in polymer, ceramic and metal matri...
327-340An attempt has been made to describe the wide range of composites based on the combination of...
A review of the various carbon fibre reinforced composites is presented. The fibre properties and th...
The potential of metal matrix composites is discussed, after an introduction to the underlying princ...
Carbon fiber Composites forecasts indicate several years of supply that will exceed the anticipated ...
Metal Matrix Composites (MMCs) are materials in which reinforcements are distributed in a metal matr...
Materials scientists express their interest in metal-matrix composites (MMC) in order to reach a hig...
In recent years the potential of metal-matrix composite (MMC) materials for significant improvement ...
Composites are composed from two or more materials having different characteristics are combined to ...
In the past few years the global need for reduced weight, low cost, high wear resistance and good qu...
The paper discusses the application of carbon fibre composite materials in the building industry. It...
Abstract — The Mechanical properties of composites based on epoxy resin (ER) filled with metal powde...
Carbon Composites: Composites with Carbon Fibers, Nanofibers, and Nanotubes, Second Edition, provide...
Carbon fibers have specific characteristics in comparison with industrial and structural materials u...
Al-, Zn-, and Cu-based matrix composites reinforced with continuous fibres of carbon, SiC, Al2O3, or...
Carbon fibres/particles can be satisfactory reinforcing material in polymer, ceramic and metal matri...
327-340An attempt has been made to describe the wide range of composites based on the combination of...
A review of the various carbon fibre reinforced composites is presented. The fibre properties and th...
The potential of metal matrix composites is discussed, after an introduction to the underlying princ...
Carbon fiber Composites forecasts indicate several years of supply that will exceed the anticipated ...
Metal Matrix Composites (MMCs) are materials in which reinforcements are distributed in a metal matr...
Materials scientists express their interest in metal-matrix composites (MMC) in order to reach a hig...
In recent years the potential of metal-matrix composite (MMC) materials for significant improvement ...
Composites are composed from two or more materials having different characteristics are combined to ...
In the past few years the global need for reduced weight, low cost, high wear resistance and good qu...
The paper discusses the application of carbon fibre composite materials in the building industry. It...
Abstract — The Mechanical properties of composites based on epoxy resin (ER) filled with metal powde...
Carbon Composites: Composites with Carbon Fibers, Nanofibers, and Nanotubes, Second Edition, provide...
Carbon fibers have specific characteristics in comparison with industrial and structural materials u...
Al-, Zn-, and Cu-based matrix composites reinforced with continuous fibres of carbon, SiC, Al2O3, or...
