The method of characteristics coupled with a log-spiral failure surface was used to develop a theory for vertical uplift capacity of shallow horizontal strip anchors in a general c-phi soil. Uplift-capacity factors F(c), F(q) and F(gamma), for the effects of cohesion, surcharge, and density, respectively, have been established as functions of embedment ratio lambda and angle of friction phi. The extent of the failure surface at the ground has also been determined. Comparisons made with existing test results support the predictive capability of the theory, and comparisons with the analysis proposed by Meyerhof and Adams show the proposed analysis provides slightly more conservative predictions of pullout capacity
AbstractIn this paper, an analytical method to compute the uplift capacity of an obliquely loaded ho...
The vertical uplift resistance of horizontal plate anchors embedded in sand has been computed for in...
The estimation of the undrained pullout capacity of plate anchors is vital for the design of offshor...
The method of characteristics coupled with a log-spiral failure surface was used to develop a theory...
Ground anchors are applicable to Sea-walls, transmission tower, buried pipeline, etc. in which they ...
With an application of the upper bound finite element limit analysis, the vertical pullout capacity ...
Uplift capacities of inclined strip anchors in soil with a horizontal ground surface are obtained un...
This paper presents new theoretical predictions of the undrained uplift capacity of deeply embedded ...
The vertical uplift resistance of a group of two horizontal coaxial strip anchors, embedded in a gen...
Ground anchors are subjected to tensile loads and are extensively used for civil engineering structu...
By incorporating the variation of peak soil friction angle (phi) with mean principal stress (sigma(m...
The vertical uplift capacity of strip anchors embedded horizontally at shallow depths in sand is exa...
In this paper, an analytical method to compute the uplift capacity of an obliquely loaded horizontal...
Based on a large number of laboratory model results many investigators reported the uplift loading o...
The vertical uplift resistance of two interfering rigid strip plate anchors embedded horizontally at...
AbstractIn this paper, an analytical method to compute the uplift capacity of an obliquely loaded ho...
The vertical uplift resistance of horizontal plate anchors embedded in sand has been computed for in...
The estimation of the undrained pullout capacity of plate anchors is vital for the design of offshor...
The method of characteristics coupled with a log-spiral failure surface was used to develop a theory...
Ground anchors are applicable to Sea-walls, transmission tower, buried pipeline, etc. in which they ...
With an application of the upper bound finite element limit analysis, the vertical pullout capacity ...
Uplift capacities of inclined strip anchors in soil with a horizontal ground surface are obtained un...
This paper presents new theoretical predictions of the undrained uplift capacity of deeply embedded ...
The vertical uplift resistance of a group of two horizontal coaxial strip anchors, embedded in a gen...
Ground anchors are subjected to tensile loads and are extensively used for civil engineering structu...
By incorporating the variation of peak soil friction angle (phi) with mean principal stress (sigma(m...
The vertical uplift capacity of strip anchors embedded horizontally at shallow depths in sand is exa...
In this paper, an analytical method to compute the uplift capacity of an obliquely loaded horizontal...
Based on a large number of laboratory model results many investigators reported the uplift loading o...
The vertical uplift resistance of two interfering rigid strip plate anchors embedded horizontally at...
AbstractIn this paper, an analytical method to compute the uplift capacity of an obliquely loaded ho...
The vertical uplift resistance of horizontal plate anchors embedded in sand has been computed for in...
The estimation of the undrained pullout capacity of plate anchors is vital for the design of offshor...