Computer aided design of horizontal drilling machine designed to drill lubrication holes for agricultural machines

V diplomskem delu, se bom osredotočil na konstruiranje novega horizontalnega vrtalnega stroja, s katerim bi avtomatizirali postopek vrtanja izvrtin ter s tem skrajšali čas vrtanja. Vrtanje mazalnih izvrtin v rotorje mulčerjev se je izvajalo z ročnim horizontalnim vrtalnim strojem, kjer je postopek vrtanja trajal približno 5 do 15 minut, odvisno od globine izvrtine in od spretnosti delavca. Najpomembnejši cilj, ki smo ga dosegli, je, da smo čas vrtanja izvrtine prepolovili. Delavcu smo omogočili, da med vrtanjem vreže navoj v izvrtino, med tem ko stroj obratuje, kar pri prejšnjem ni bilo mogoče.In diploma I will focus on the construction of a new horizontal drilling machine, with whom would automate the drilling process of the holes and with this we would shorten the drilling time. Drilling of lubricating holes in the mulch rotors was carried out with a manual horizontal drilling machine, where the drilling process lasted about 5 to 15 minutes, depending on the depth of the hole and the workers skill. The most important goal we have achieved, is that the drilling time of the hole has been halved. We enabled the worker to cut the thread into the hole, while the machine was operating, which was not possible with the previous machine