TiO2:N is known for its photoactivity upon illumination with visible light. Using filtered arc with energetic particle fluxes, deposition near room temperature on sensitive substrates, e.g. polymers should be possible. However, addition of nitrogen gas flux during deposition results in very small nitrogen contents. Incorporation of nitrogen up to 5–7.5�at.% for either cathodic arc deposition or plasma based ion implantation and deposition leads to a reduction of the band gap down to 2.7�eV before the films become semimetallic. However, only deposition at a temperature of 200��C allows avoiding the early formation of defects within the band gap. The nitrogen content was determined using secondary ion mass spectroscopy (SIMS) and cali...
AbstractNitrogen-doped titania (NTiO2) thin films were synthesized using atmospheric-pressure chemic...
Plasma-assisted atomic layer deposition (PA-ALD) was adopted to deposit TiO2-xNx ultrathin layers on...
This work was demonstrated a cold-wall chemical vapour deposition (CVD) setup to prepare nitrogen (N...
In this paper we investigate the possibility of incorporating nitrogen into amorphous, photocatalyti...
Three different ways to dope nitrogen into TiO2 by means of RF reactive sputtering was compared, and...
This article may be downloaded for personal use only. Any other use requires prior permission of the...
This study reports on the properties of nitrogen doped titanium dioxide (TiO2) thin films considerin...
Nitrogen-doped TiO2 thin films for biomedical and solar energy applications were deposited on glass ...
TiO2 and nitrogen-containing TiO2 thin films were deposited on glass and silicon wafer substrates us...
Orientador: Luiz Fernando ZagonelDissertação (mestrado) - Universidade Estadual de Campinas, Institu...
Photocatalytically active, N-doped TiO2 thin films were prepared by low pressure metalorganic chemic...
In order to narrow the band gap of TiO2, nitrogen doping by combining thermal atomic layer depositio...
The influence of deposition and annealing parameters on optical, structural and photocatalytic prope...
AbstractAtmospheric-pressure chemical vapour deposition (APCVD) was used to produce a series of nitr...
This work presents a simple, fast (20 min treatment), inexpensive, and highly efficient method for s...
AbstractNitrogen-doped titania (NTiO2) thin films were synthesized using atmospheric-pressure chemic...
Plasma-assisted atomic layer deposition (PA-ALD) was adopted to deposit TiO2-xNx ultrathin layers on...
This work was demonstrated a cold-wall chemical vapour deposition (CVD) setup to prepare nitrogen (N...
In this paper we investigate the possibility of incorporating nitrogen into amorphous, photocatalyti...
Three different ways to dope nitrogen into TiO2 by means of RF reactive sputtering was compared, and...
This article may be downloaded for personal use only. Any other use requires prior permission of the...
This study reports on the properties of nitrogen doped titanium dioxide (TiO2) thin films considerin...
Nitrogen-doped TiO2 thin films for biomedical and solar energy applications were deposited on glass ...
TiO2 and nitrogen-containing TiO2 thin films were deposited on glass and silicon wafer substrates us...
Orientador: Luiz Fernando ZagonelDissertação (mestrado) - Universidade Estadual de Campinas, Institu...
Photocatalytically active, N-doped TiO2 thin films were prepared by low pressure metalorganic chemic...
In order to narrow the band gap of TiO2, nitrogen doping by combining thermal atomic layer depositio...
The influence of deposition and annealing parameters on optical, structural and photocatalytic prope...
AbstractAtmospheric-pressure chemical vapour deposition (APCVD) was used to produce a series of nitr...
This work presents a simple, fast (20 min treatment), inexpensive, and highly efficient method for s...
AbstractNitrogen-doped titania (NTiO2) thin films were synthesized using atmospheric-pressure chemic...
Plasma-assisted atomic layer deposition (PA-ALD) was adopted to deposit TiO2-xNx ultrathin layers on...
This work was demonstrated a cold-wall chemical vapour deposition (CVD) setup to prepare nitrogen (N...