Low density polyethylene was converted into hydrocarbons over Zn- and H-ZSM-11 zeolite catalysts in a fixed-bed reactor during 20 and 60 min reaction time, 0.5 and 2.0 polymer to catalyst mass ratio at 500 °C. The zeolites were synthesized by conventional techniques and characterized by XRD, pyridine FTIR and N2 adsorption. The adsorbed pyridine spectra demonstrated that new Lewis sites were formed after Zn exchange, and that the relationship between Lewis and Brönsted sites in the Zn-ZSM-11 zeolite (3.53) was much higher than that in the H-ZSM-11 zeolite (0.09). Thermal analyses confirmed that the temperature of decomposition of the polymer can be decreased in as much as about 145 °C when the catalysts were added. As compared to the therma...
Recovering monomers from polyolefins is challenging due to their chemical inertness. Chemical recycl...
The development of technologies to recycle polyethylene (PE) and polypropylene (PP), globally the tw...
The effect of pre-degradation treatment in catalytic pyrolysis of polymer was assessed using thermog...
High-density polyethylene (HDPE) was converted to a mixed of lower and higher hydrocarbons over micr...
Catalytic pyrolysis of plastic waste can offer an economical process for plastic waste conversion du...
The potential of catalytic processing as an effective method for polymer recycling was studied using...
In this research, catalytic cracking of low-density polyethylene (LDPE) has been carried out in the ...
The present work deals with the thermo-catalytic pyrolysis of LDPE (low-density polyethylene) in lab...
Catalytic cracking of plastics waste to produce fuel is increasingly gaining the attention of resear...
The large volume and resistance to degradation of plastic materials, generate a serious environmenta...
Abstarct. Processing of propane-butane and propane-propylene fractions in light hydrocarbons on the ...
A new theoretical and practical framework has been developed through operando study of the zeolite c...
Plastic wastes, which cause a serious environmental problem in urban areas, can serve as sources of ...
Researchers proposed numerous solutions to plastic pollution, with the hope to tackle the intractabl...
The catalytic degradation of linear low-density (lldPE) polyethylene over HY-zeolite catalyst was st...
Recovering monomers from polyolefins is challenging due to their chemical inertness. Chemical recycl...
The development of technologies to recycle polyethylene (PE) and polypropylene (PP), globally the tw...
The effect of pre-degradation treatment in catalytic pyrolysis of polymer was assessed using thermog...
High-density polyethylene (HDPE) was converted to a mixed of lower and higher hydrocarbons over micr...
Catalytic pyrolysis of plastic waste can offer an economical process for plastic waste conversion du...
The potential of catalytic processing as an effective method for polymer recycling was studied using...
In this research, catalytic cracking of low-density polyethylene (LDPE) has been carried out in the ...
The present work deals with the thermo-catalytic pyrolysis of LDPE (low-density polyethylene) in lab...
Catalytic cracking of plastics waste to produce fuel is increasingly gaining the attention of resear...
The large volume and resistance to degradation of plastic materials, generate a serious environmenta...
Abstarct. Processing of propane-butane and propane-propylene fractions in light hydrocarbons on the ...
A new theoretical and practical framework has been developed through operando study of the zeolite c...
Plastic wastes, which cause a serious environmental problem in urban areas, can serve as sources of ...
Researchers proposed numerous solutions to plastic pollution, with the hope to tackle the intractabl...
The catalytic degradation of linear low-density (lldPE) polyethylene over HY-zeolite catalyst was st...
Recovering monomers from polyolefins is challenging due to their chemical inertness. Chemical recycl...
The development of technologies to recycle polyethylene (PE) and polypropylene (PP), globally the tw...
The effect of pre-degradation treatment in catalytic pyrolysis of polymer was assessed using thermog...