Add to ORKGNowadays preparation of structures on flexible substrates is highly demanded because of using this patterns in field of flexible electronics. This contribution deals with photolitographic procces for preparation of structures on flexible substrates. The method of photolitography enables to create designed patterns in various material (e.g. metals as conductive layers) on various substrates (silicon wafers, foils, etc.). First the designed pattern is exposed through the mask by UV light into polymer resist, then the pattern is transfered into metal layer by wet etching through the developed windows in resist. In this paper several patterns are prepared through the positive resist PMMA by photolitography into various metal layer (Cu, Al) on f...
Metallization of a polydimethylsiloxane (PDMS)-based substrate is a challenge due to the difficultie...
In this work, a method for the rapid synthesis of metallic microtracks on polyetherimide is presente...
Photolithography is the process of using photosensitive plastic coatings to define areas to be etche...
In article number 1704451, Jose Marques‐Hueso and co‐workers present a rapid photopatterning method ...
Cost effective and high quality processes are needed for further development of flexible electronic ...
Main aim of the research has been the development of alternative lithography strategies for the fabr...
International audienceA new efficient approach for selective metallization of flexible substrates su...
Microlithography is a highly precise pattern-transfer technique, needed for the manufacturing of sem...
Abstract Conductive micro-patterned copper tracks were fabricated by UV direct-writing of a nanopart...
In this report, the development of conventional, mass-printing strategies into high-resolution, alte...
International audienceThis paper presents our first results on printed copper connections on flexibl...
Flexible and printable electronics are attractive techniques which are believed to be widespread and...
We are describing two strategies for controlled (geometry and dimension) preparation of metal micro...
Metallization of a polydimethylsiloxane (PDMS)-based substrate is a challenge due to the difficultie...
In this work, a method for the rapid synthesis of metallic microtracks on polyetherimide is presente...
Photolithography is the process of using photosensitive plastic coatings to define areas to be etche...
In article number 1704451, Jose Marques‐Hueso and co‐workers present a rapid photopatterning method ...
Cost effective and high quality processes are needed for further development of flexible electronic ...
Main aim of the research has been the development of alternative lithography strategies for the fabr...
International audienceA new efficient approach for selective metallization of flexible substrates su...
Microlithography is a highly precise pattern-transfer technique, needed for the manufacturing of sem...
Abstract Conductive micro-patterned copper tracks were fabricated by UV direct-writing of a nanopart...
In this report, the development of conventional, mass-printing strategies into high-resolution, alte...
International audienceThis paper presents our first results on printed copper connections on flexibl...
Flexible and printable electronics are attractive techniques which are believed to be widespread and...
We are describing two strategies for controlled (geometry and dimension) preparation of metal micro...
Metallization of a polydimethylsiloxane (PDMS)-based substrate is a challenge due to the difficultie...
In this work, a method for the rapid synthesis of metallic microtracks on polyetherimide is presente...
Photolithography is the process of using photosensitive plastic coatings to define areas to be etche...