Evolution of corrosion protection for sol-gel coatings doped with inorganic inhibitors

International audienceOne the way to improve the self-repair properties of sol–gel films on aluminium alloy is the addition of corrosion inhibitors which could be released from the coating, minimising the corrosion of the unprotected area. Environmentally friendly corrosion inhibitors are studied (chromium III, molybdate, permanganate and cerium III) and compared to the standard corrosion inhibitor, i.e. hexavalent chromium.Corrosion performances are studied by polarisation resistance (Rp) in chloride medium. Evolution of composition of sol–gel coatings, during the corrosion test, is examined by GDOES (glow discharge optical emission spectroscopy).The results show that the morphology of sol–gel and the solubility of the additive play a role in the effectiveness of corrosion protection for a long term. Additives such as molybdate and permanganate ions decrease the sol–gel network stability and are too soluble (they are rapidly lost from the sol–gel films, in an aggressive medium), decreasing the power to prevent corrosion. Incorporation of Ce III is not efficient for a long time due to its high solubility. Sol–gel films containing Cr VI and Cr III provide adequate corrosion protection, due to the sol–gel stability and their low solubility