This book presents experimental and theoretical results on extremely powerful plasma generators. It addresses pulsed electrical mega-ampere arcs and the mechanisms of energy transfer from the arc into hydrogen, helium and air under pressures up to 250 MPa and currents up to 2 MA. Extreme plasma parameters and increased energy density in the arc were achieved. It was found experimentally that increasing the initial gas pressure to hundreds of MPa leads to improved arc stability, high efficiency of energy transfer from arc to gas, and plasma enthalpy growth. The data obtained data provides the basis for the development of electrophysical devices with high energy density, e.g. high intensity sources for visible, UV and X-ray irradiation for la...
In the past several authors have reported on experiments with wall stabilized arcs, to study transpo...
A high-power pulsed magnetized arc discharge has been developed to allow the superimposition of a dc...
A magnetized hydrogen plasma beam was generated with a cascaded arc, expanding in a vacuum vessel at...
This paper will describe the techniques needed to electrically generate highly ionized dense plasmas...
In the past several authors have reported on experiments with wall stabilized arcs, to study transpo...
In the past several authors have reported on experiments with wall stabilized arcs, to study transpo...
The paper describes the principle and physical phenomena in plasma generators that are used in mater...
Interest has grown rapidly in new methods of storing megajoules of energy and delivering it to loads...
The paper describes the principle and physical phenomena in plasma generators that are used in mater...
Over the past 15 years, steady and sometimes exciting progress has been made in the hybrid technolog...
Pulsed power technologies could be an answer to many cutting-edge applications. The challenge is in ...
In the past several authors have reported on experiments with wall stabilized arcs, to study transpo...
In the plasma of a cascaded arc, with arc currents from 40 up to 100 A, arc voltage of about 100 V a...
In the plasma of a cascaded arc, with arc currents from 40 up to 100 A, arc voltage of about 100 V a...
A magnetized hydrogen plasma beam was generated with a cascaded arc, expanding in a vacuum vessel at...
In the past several authors have reported on experiments with wall stabilized arcs, to study transpo...
A high-power pulsed magnetized arc discharge has been developed to allow the superimposition of a dc...
A magnetized hydrogen plasma beam was generated with a cascaded arc, expanding in a vacuum vessel at...
This paper will describe the techniques needed to electrically generate highly ionized dense plasmas...
In the past several authors have reported on experiments with wall stabilized arcs, to study transpo...
In the past several authors have reported on experiments with wall stabilized arcs, to study transpo...
The paper describes the principle and physical phenomena in plasma generators that are used in mater...
Interest has grown rapidly in new methods of storing megajoules of energy and delivering it to loads...
The paper describes the principle and physical phenomena in plasma generators that are used in mater...
Over the past 15 years, steady and sometimes exciting progress has been made in the hybrid technolog...
Pulsed power technologies could be an answer to many cutting-edge applications. The challenge is in ...
In the past several authors have reported on experiments with wall stabilized arcs, to study transpo...
In the plasma of a cascaded arc, with arc currents from 40 up to 100 A, arc voltage of about 100 V a...
In the plasma of a cascaded arc, with arc currents from 40 up to 100 A, arc voltage of about 100 V a...
A magnetized hydrogen plasma beam was generated with a cascaded arc, expanding in a vacuum vessel at...
In the past several authors have reported on experiments with wall stabilized arcs, to study transpo...
A high-power pulsed magnetized arc discharge has been developed to allow the superimposition of a dc...
A magnetized hydrogen plasma beam was generated with a cascaded arc, expanding in a vacuum vessel at...