DSP Integrated Parameterized FPGA Based Cavity Simulator & Controller for VUV FEL - SIMCON ver.2.1. Installation and Configuration Procedures; USER'S MANUAL

The note describes integrated system of hardware controller and simulator of theresonant superconducting, narrowband niobium cavity, originally considered for the TTF and TESLA in DESY, Hamburg (now predicted for the VUV and X-Ray FEL). The controller bases on a programmable circuit Xilinx VirtexII V3000 embedded on a PCB XtremeDSP Development Kit by Nallatech. The FPGA circuit configuration was done in the VHDL language. The internal hardware multiplication components, present in Virtex II chips, were used, to improve the floating point calculation efficiency. The implementation was achievedof a device working in the real time, according to the demands of the LLRF control system forthe TESLA Test Facility. The device under consideration will be referred to as superconducting cavity (SCCav) SIMCON throughout this work. This document is intended to be used by end users and operators. It describes step by step how to install SIMCON in specific configuration, how and what software to copy to computer. There is described set of basic Matlab functions for developers of control algorithms. This paper also contains brief description how to use Matlab function of one algorithmwith its graphic user panels