<p>A: Field emission scanning electron microscopy (FE-SEM), Bar = 10 μm. B: Thin Film (TF)-XRD pattern of the surface of bioactive PSs. T: α-Titanium (Ti). C: Energy dispersive X-ray analysis (EDX).</p
This work investigated the ability of electropolished Ti surface to induce Hydroxyapatite (HA) nucle...
The prediction of implant behaviors in vivo by the use of easy-to-perform in vitro methods is of gre...
This study investigated the viability of coating commercially pure titanium (CPTi) surfaces, modifie...
<p>Field emission scanning electron microscopy (FE-SEM) showed significant HA-formation on the surfa...
Titanium (Ti)-6Al-4V alloy, which is widely used in spinal instrumentation with a pedicle screw (PS)...
<p>Following torsional screw extraction analysis, the surface of the threaded portion of removed ped...
The aim of the present study was to compare the nucleating and growing behaviour on four types of bi...
The aim of the present study was to compare the nucleating behaviour on four types of bioactive surf...
Bioconductive materials and in particular implants using Ti alloy (Ti6–Al4–V) coated with hydroxya...
The aim of the study was to compare Ca and P formation (CaP) and subsequent bone cell response of a ...
Hydroxyapatite (HA) thin-film coatings grown biomimetically using simulated body fluid (SBF) are des...
The aim of the study was to compare Ca and P formation (CaP) and subsequent bone cell response of a ...
Commercial-grade dense Ti-6Al-4V alloy substrate was mechanically roughened, cleaned, and treated wi...
A bonelike apatite layer was formed on metallic substrate ( Commercial grade Titanium) when Calciu...
The initial stages of the in vitro bio mineralization of implant materials for the replacement of ha...
This work investigated the ability of electropolished Ti surface to induce Hydroxyapatite (HA) nucle...
The prediction of implant behaviors in vivo by the use of easy-to-perform in vitro methods is of gre...
This study investigated the viability of coating commercially pure titanium (CPTi) surfaces, modifie...
<p>Field emission scanning electron microscopy (FE-SEM) showed significant HA-formation on the surfa...
Titanium (Ti)-6Al-4V alloy, which is widely used in spinal instrumentation with a pedicle screw (PS)...
<p>Following torsional screw extraction analysis, the surface of the threaded portion of removed ped...
The aim of the present study was to compare the nucleating and growing behaviour on four types of bi...
The aim of the present study was to compare the nucleating behaviour on four types of bioactive surf...
Bioconductive materials and in particular implants using Ti alloy (Ti6–Al4–V) coated with hydroxya...
The aim of the study was to compare Ca and P formation (CaP) and subsequent bone cell response of a ...
Hydroxyapatite (HA) thin-film coatings grown biomimetically using simulated body fluid (SBF) are des...
The aim of the study was to compare Ca and P formation (CaP) and subsequent bone cell response of a ...
Commercial-grade dense Ti-6Al-4V alloy substrate was mechanically roughened, cleaned, and treated wi...
A bonelike apatite layer was formed on metallic substrate ( Commercial grade Titanium) when Calciu...
The initial stages of the in vitro bio mineralization of implant materials for the replacement of ha...
This work investigated the ability of electropolished Ti surface to induce Hydroxyapatite (HA) nucle...
The prediction of implant behaviors in vivo by the use of easy-to-perform in vitro methods is of gre...
This study investigated the viability of coating commercially pure titanium (CPTi) surfaces, modifie...