The DIONISOS experiment is used to study the impact of RF helium (He) plasma on the surface morphology of tungsten (W) at a frequency of 13.56 MHz. Helium ion energy distributions with a span of 70–75 eV, while still below the sputtering threshold result in nano-tendril bundles (NTBs) and free-standing W whiskers on surfaces at 1020 K. The NTBs are distributed intragranularly with coverage of less than 10% while reaching up to 30 µm normal to the surface for He ion fluence of 7.6 × 10²⁵m⁻² and flux density of 10²²m⁻²s⁻¹. Analysis of the NTB interior and sub-surface structure is provided through focused ion beam cross section. Keywords: Tungsten fuzz; Helium; Nano-tendril; RF sheathUnited States. Department of Energy (Award DE-SC00-02060)Uni...
Higher melting point (3695K), lower sputtering yield and most importantly, lower in-bulk, and co-dep...
Nuclear fusion is the most promising renewable energy source for the near future. It can provide a l...
Recovery of a flat tungsten surface from a nano-tendril surface is attempted through three technique...
The DIONISOS experiment is used to study the impact of RF helium (He) plasma on the surface morpholo...
Time-modulated helium (He) ion energy (e.g. V_Bias = -50 + 25*sin(2*pi*f_RF*t), f_RF = 13.56 MHz) is...
The mechanisms responsible for and controlling the growth of tungsten nano-tendrils (or "fuzz") unde...
Experiments were performed in the Pilot-PSI linear plasma device to study the formation of helium-in...
Nano-tendril bundles (NTBs) were generated in DC He plasma with impurity gas-seeding (Ne and N2) und...
Tungsten is a leading candidate material for the diverter in future nuclear fusion reactors. Previou...
Growth of tungsten nano-tendrils (“fuzz”) has been observed for the first time in the divertor regio...
Helium (He) concentrations in tungsten nano-tendrils (W fuzz) have been measured for the first time ...
The formation of metallic nanostructures by exposure of molybdenum and tungsten surfaces to high flu...
Impact of crystal orientation on the surface morphology of the helium plasma exposed tungsten has be...
The formation of metallic nanostructures by exposure of molybdenum and tungsten surfaces to high flu...
Nuclear fusion is a great potential energy source that can provide a relatively safe and clean limit...
Higher melting point (3695K), lower sputtering yield and most importantly, lower in-bulk, and co-dep...
Nuclear fusion is the most promising renewable energy source for the near future. It can provide a l...
Recovery of a flat tungsten surface from a nano-tendril surface is attempted through three technique...
The DIONISOS experiment is used to study the impact of RF helium (He) plasma on the surface morpholo...
Time-modulated helium (He) ion energy (e.g. V_Bias = -50 + 25*sin(2*pi*f_RF*t), f_RF = 13.56 MHz) is...
The mechanisms responsible for and controlling the growth of tungsten nano-tendrils (or "fuzz") unde...
Experiments were performed in the Pilot-PSI linear plasma device to study the formation of helium-in...
Nano-tendril bundles (NTBs) were generated in DC He plasma with impurity gas-seeding (Ne and N2) und...
Tungsten is a leading candidate material for the diverter in future nuclear fusion reactors. Previou...
Growth of tungsten nano-tendrils (“fuzz”) has been observed for the first time in the divertor regio...
Helium (He) concentrations in tungsten nano-tendrils (W fuzz) have been measured for the first time ...
The formation of metallic nanostructures by exposure of molybdenum and tungsten surfaces to high flu...
Impact of crystal orientation on the surface morphology of the helium plasma exposed tungsten has be...
The formation of metallic nanostructures by exposure of molybdenum and tungsten surfaces to high flu...
Nuclear fusion is a great potential energy source that can provide a relatively safe and clean limit...
Higher melting point (3695K), lower sputtering yield and most importantly, lower in-bulk, and co-dep...
Nuclear fusion is the most promising renewable energy source for the near future. It can provide a l...
Recovery of a flat tungsten surface from a nano-tendril surface is attempted through three technique...