Shear bond strength of ceramic fused to CAD-CAM milled alloys

This study evaluated the metal ceramic bond strength of cast Ni-Cr, cast Co-Cr, sintered Co-Cr and milled Co-Cr alloys to ceramic through two application procedures including the ceramic layering technique and ceramic pressed-on technique. Ceramic materials (Ø 8 mm, 1.5 mm thickness) were veneered by either the layering or pressed-on technique to cast Ni-Cr, cast Co-Cr, sintered Co-Cr and hard milled Co-Cr alloy disc (12 × 12 × 0.5 mm) (n=15). All specimens were treated with a thermal cycle process for 500 cycles at the temperature between 5 °C and 55 °C with immerse time of 30 seconds and 5 seconds for specimen transfer. The shear bond strength was determined on a universal testing machine at a crosshead speed of 0.5 mm/min. The de-bonding surfaces were examined under visual inspection and SEM. The metal ceramic interface of specimens for each group was examined in SEM and EDS. The means of bond strength were compared using two-way ANOVA followed by post-hoc Tukey HSD multiple comparison test to determine for statistically significant difference at 95% level of confidence. The Weibull analysis was used for determination survival probability of shear bond strength. The bond strength of ceramic to sintered Co-Cr alloys was higher than that to others metal alloys. The metal-ceramic mean bond strength was significantly higher for the ceramic pressed-on technique than that of the ceramic layering technique for all tested alloys (p