The influence of the Rh content of catalysts supported on SiO2?Al2O3 (SIRAL 70 and 80, with 70 and 80 wt% of SiO2) on the activity and selectivity for selective ring opening of decalin was studied at 325 and 350 C. An optimum metal content was found at 1.5 wt% of rhodium. Both supports present moderate and strong acid sites. For the selective opening of decalin, the best metal/support combination was found with Rh(1.5)/SIRAL 70 balancing the support acidity together with the hydrogenolytic activity of the metal. A linear correlation was established between the amount of coke deposited and the formation of dehydrogenated compound.Fil: D'ippolito, Silvana Andrea. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Te...
Selective ring opening of naphthenic rings is the optimum process for reducing the cyclo-paraffin an...
The reaction of selective ring opening using alumina supported Pt–Ir catalysts with and without Mg a...
The aim of this study was to study the ring opening of decalin at 300 and 350 °C using Pt-Ir/HY zeol...
International audienceThe influence of the Rh content of catalysts supported on SiO2–Al2O3(SIRAL 70 ...
International audienceThe influence of the Bronsted acidity, SiO2/Al2O3 ratio and Rh-Pd content on t...
Rh–Pd catalysts supported on Al2O3, SiO2 and SiO2–Al2O3 (SIRAL 40) were studied for methylcyclohexan...
Ring opening of decalin was studied using Rh-Pd(x) catalysts supported on SiO2-Al2O3, prepared by co...
The influence of the addition of HCl and Ir (1 wt %) to different SiO2−Al2O3 supports of varying sil...
International audienceRh Pd catalysts supported on Al2O3, SiO2 and SiO2 Al2O3 (SIRAL 40) were studie...
Bimetallic Rh-Pd catalysts prepared by various impregnation methods were evaluated in the selective ...
The influence of the addition of HCl and Ir (1 wt %) to different SiO<sub>2</sub>–Al<sub>2</sub>O<su...
International audienceThe influence of Ir content on sulphur tolerance for the selective ring openin...
The influence of the supports (Al2O3, TiO2 and SiO2) on the activity and selectivity of Pt-Ir cataly...
Monometallic and bimetallic Pd-Rh catalysts with various Rh/Pd atomic ratios (=0.5, 1 and 2) and a t...
The catalytic performance of a Pt?Ir/Al2O3 catalyst for the selective ring opening of decalin was st...
Selective ring opening of naphthenic rings is the optimum process for reducing the cyclo-paraffin an...
The reaction of selective ring opening using alumina supported Pt–Ir catalysts with and without Mg a...
The aim of this study was to study the ring opening of decalin at 300 and 350 °C using Pt-Ir/HY zeol...
International audienceThe influence of the Rh content of catalysts supported on SiO2–Al2O3(SIRAL 70 ...
International audienceThe influence of the Bronsted acidity, SiO2/Al2O3 ratio and Rh-Pd content on t...
Rh–Pd catalysts supported on Al2O3, SiO2 and SiO2–Al2O3 (SIRAL 40) were studied for methylcyclohexan...
Ring opening of decalin was studied using Rh-Pd(x) catalysts supported on SiO2-Al2O3, prepared by co...
The influence of the addition of HCl and Ir (1 wt %) to different SiO2−Al2O3 supports of varying sil...
International audienceRh Pd catalysts supported on Al2O3, SiO2 and SiO2 Al2O3 (SIRAL 40) were studie...
Bimetallic Rh-Pd catalysts prepared by various impregnation methods were evaluated in the selective ...
The influence of the addition of HCl and Ir (1 wt %) to different SiO<sub>2</sub>–Al<sub>2</sub>O<su...
International audienceThe influence of Ir content on sulphur tolerance for the selective ring openin...
The influence of the supports (Al2O3, TiO2 and SiO2) on the activity and selectivity of Pt-Ir cataly...
Monometallic and bimetallic Pd-Rh catalysts with various Rh/Pd atomic ratios (=0.5, 1 and 2) and a t...
The catalytic performance of a Pt?Ir/Al2O3 catalyst for the selective ring opening of decalin was st...
Selective ring opening of naphthenic rings is the optimum process for reducing the cyclo-paraffin an...
The reaction of selective ring opening using alumina supported Pt–Ir catalysts with and without Mg a...
The aim of this study was to study the ring opening of decalin at 300 and 350 °C using Pt-Ir/HY zeol...