Liquid-Phase Hydrogenation of Crotonaldehyde over Platinum- and Palladium-Based Catalysts

The selective hydrogenation of crotonaldehyde in liquid phase, at a temperature of 353 K and a H2 pressure of 400 kPa, is studied over different palladium- and platinum-based catalysts (Pd−Pb/α-Al2O3, Pd−Zn/α-Al2O3, Pd/ZnO, and two Pt/ZnO samples, prepared from Pt(NH3)4(NO3)2 and H2PtCl6, respectively). The intrinsic selectivity of palladium cannot be modified by alloying or following a promotion with a second metal, and the selectivity to crotyl alcohol measured over palladium-based samples is nil or extremely low. The selectivity corresponding to the Pt/ZnO catalysts increases with the time-on-stream reaching high levels. The formation of a Pt−Zn alloy is the origin of the enhanced selectivity toward crotyl alcohol; this effect is more pronounced for the sample that has been prepared from H2PtCl6.Fil: Campo, Betiana Carla. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Planta Piloto de Ingeniería Química. Universidad Nacional del Sur. Planta Piloto de Ingeniería Química; ArgentinaFil: Volpe, María Alicia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Planta Piloto de Ingeniería Química. Universidad Nacional del Sur. Planta Piloto de Ingeniería Química; ArgentinaFil: Gigola, Carlos Eugenio. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Bahía Blanca. Planta Piloto de Ingeniería Química. Universidad Nacional del Sur. Planta Piloto de Ingeniería Química; Argentin