Constitutive theory for Recycled Aggregate Concretes subjected to high temperature

The use of recycled aggregates in concrete to partially substitute the natural ones has strongly increased in the last decades. Due to both, environmental and economical reasons, a relevant and increasing proportion of the concrete production in the developed countries is currently based on combinations between recycled and natural aggregates. As a result, a more eco-friendly constructive material is obtained which has gained significant impact in the construction market. Consequently, there is a need for accurate constitutive theories for predicting the mechanical behavior of recycled aggregate concretes (RAC) subjected to severe loading conditions such as high temperature. In this work, a non-local gradient poroplastic material model is formulated for RAC composed by arbitrary proportions of recycled aggregates, when they are affected by long term exposures to high temperature. The model takes into account through a single parameter the dependence of the temperature-dependent yield condition degradation, and of the gradient and fracture energy based softening laws on the proportion of recycled aggregates. The proposed dissipative constitutive theory is fully consistent with the thermodynamic laws. The predictive capabilities of the proposed constitutive formulation have been tested against experimental results on RAC specimens considering variable amounts of recycled aggregates in both, tensile and compressive regimes. Finally, the influence of the recycled aggregate inclusion and of its participation proportion on the localization properties and on the fundamental failure indicators is evaluated.Fil: Etse, Jose Guillermo. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad Nacional de Tucuman. Facultad de Ciencias Exactas y Tecnología. Centro de Metodos Numericos y Computacionales En Ingeniería; Argentina. Universidad de Buenos Aires. Facultad de Ingeniería. Departamento de Construcciones y Estructuras. Laboratorio de Materiales y Estructuras; ArgentinaFil: Vrech, Sonia Mariel. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad Nacional de Tucuman. Facultad de Ciencias Exactas y Tecnología. Centro de Metodos Numericos y Computacionales En Ingeniería; ArgentinaFil: Ripani, Marianela. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad de Buenos Aires. Facultad de Ingeniería. Departamento de Construcciones y Estructuras. Laboratorio de Materiales y Estructuras; Argentin