We study micro-scale TiO2 junctions that are suitable to be used as resistive random-access memory nonvolatile devices with radiation hardness memristive properties. The fabrication and structural and electrical characterization of the junctions are presented. We obtained a retentivity of 105 s, an endurance of 104 cycles and reliable switching with short electrical pulses (time-width below 10 ns). Additionally, the devices were exposed to 25 MeV oxygen ions. Then, we performed electrical measurements comparing pristine and irradiated devices in order to check the feasibility of using these junctions as memory elements with memristive and radiation hardness properties.Fil: Ghenzi, Néstor. Comisión Nacional de Energía Atómica; Argentina. Con...
Memristor devices as the alternative to the next-generation non-volatile memory devices has been wid...
We report on non-volatile memory devices based on multifunctional manganites. The electric field ind...
Memory concepts based on resistive switching (RRAM) make use of simple metal-isolatormetal (MIM) str...
We report the resistive switching (RS) characteristics of Al/TiO2/Au memristive cells fabricated in ...
We measured and analyzed the dynamic and remnant current-voltages curves of Al/TiO2/Au and Ni/TiO2/N...
We probe the resistive switching response of Au/TiO2/Cu junctions, on samples initialized using both...
The theoretical and practical realization of memristive devices has been hailed as the next step for...
Nanoscale metal/oxide/metal switches have the potential to transform the market for nonvolatile memo...
Resistive random access memories (RRAMs) are considered as key enabling components for a variety of ...
A process is created at the Rochester Institute of Technology Semiconductor & Microsystems Fabricati...
The possibility to directly write electrically conducting channels in a desired position in rutile T...
Crossbar-type bipolar resistive memory devices based on low-temperature amorphous TiO2 (a-TiO2) thin...
We report on the fabrication and characterization of La2/3Ca1/3MnO3 manganite-based memristive devic...
Al/TiO2/Au memory junctions grown by reactive sputtering were fabricated and characterized. Usual hy...
Reversible and controllable conversion between unipolar and bipolar resistive switching (URS and BRS...
Memristor devices as the alternative to the next-generation non-volatile memory devices has been wid...
We report on non-volatile memory devices based on multifunctional manganites. The electric field ind...
Memory concepts based on resistive switching (RRAM) make use of simple metal-isolatormetal (MIM) str...
We report the resistive switching (RS) characteristics of Al/TiO2/Au memristive cells fabricated in ...
We measured and analyzed the dynamic and remnant current-voltages curves of Al/TiO2/Au and Ni/TiO2/N...
We probe the resistive switching response of Au/TiO2/Cu junctions, on samples initialized using both...
The theoretical and practical realization of memristive devices has been hailed as the next step for...
Nanoscale metal/oxide/metal switches have the potential to transform the market for nonvolatile memo...
Resistive random access memories (RRAMs) are considered as key enabling components for a variety of ...
A process is created at the Rochester Institute of Technology Semiconductor & Microsystems Fabricati...
The possibility to directly write electrically conducting channels in a desired position in rutile T...
Crossbar-type bipolar resistive memory devices based on low-temperature amorphous TiO2 (a-TiO2) thin...
We report on the fabrication and characterization of La2/3Ca1/3MnO3 manganite-based memristive devic...
Al/TiO2/Au memory junctions grown by reactive sputtering were fabricated and characterized. Usual hy...
Reversible and controllable conversion between unipolar and bipolar resistive switching (URS and BRS...
Memristor devices as the alternative to the next-generation non-volatile memory devices has been wid...
We report on non-volatile memory devices based on multifunctional manganites. The electric field ind...
Memory concepts based on resistive switching (RRAM) make use of simple metal-isolatormetal (MIM) str...