Study of the wear mechanisms for drill bits used in core drilling

The thesis work was made in cooperation with the I-EDDA project who evaluates the drill equipment used in core drilling. The aim of this work was to determine how and why the drill bits are worn. The work consisted of two parts; investigate drill bits used in field tests and develop a lab scale method to be able to change one drill parameter at a time and see how it affects the wear. During the field tests the rotational speed and the pressure on the drill bits were changed between the three boreholes drilled. In the lab test one parameter at a time was changed; the rotational speed, the water flow and the load. The lab test was developed to attempt to replicate the core drilling and was performed by pressing a piece of a drill bit against a rotating stone cylinder. The drill bits from the field tests and lab test were analysed with the same methods on both macro- and microscale for easier comparison. The results indicate that the lab scale test can be used to evaluate the wear of drill bits. The analyses show rock present on the matrix of all the drill bits, in various amounts. The load has the largest impact on the wear of the drill bits and cause a change in mechanism. A high pressure leads to a higher amount of damaged diamonds and three body abrasive wear on the matrix. Lower pressure leads to polished diamonds and erosive wear on the matrix