The characteristic of ZeoliteA loaded with iron and zinc on the direct conversion of methane to liquid hydrocarbons is investigated. ZeoliteA is loaded with different mass ratio of zinc and iron. Thermo Gravimetric Analysis (TGA), XRay Diffraction (XRD), and Fourier transform spectroscopy (FTIR) are used to analyze the physicochemical properties of the modified zeolite such as functional group, surface area and average diameter of unit cell. The absence of the iron content in the catalyst does not affect the framework and the crystalline of the catalyst but only affect the size of the unit cell and the surface area of the catalyst. As compare to zinc, it has modified the crystalline and framework of the catalyst. The result indicated tha...
Tesis doctoral inédita, leída en la Universidad Autónoma de Madrid, Facultad de Ciencias, Departamen...
The ultimate goal of the CAMEA concept is to reach a high analysing efficiency. This can be achieved...
The present work is aimed at designing novel organometallic push-pull species. To this end, differen...
Physical adsorption of hydrogen or other chemical fuels on the surface of carbonaceous materials off...
The preparation of transition-metal systems for catalytic multielectron transformations of small mol...
The presence of sulphides in many mine wastes and the formation of acid mine drainages (AMD) has bee...
The one-pot conversion of xylose into γ-gammavalerolactone in 2-propanol over bifunctional Zr-Al-Bet...
The one-pot conversion of xylose into γ-gammavalerolactone in 2-propanol over bifunctional Zr-Al-Bet...
The one-pot conversion of xylose into γ-gammavalerolactone in 2-propanol over bifunctional Zr-Al-Bet...
The one-pot conversion of xylose into γ-gammavalerolactone in 2-propanol over bifunctional Zr-Al-Bet...
To address the world’s need for improved biomass breakdown for the production of renewable fuel, we ...
A new method for determining the Ni0 metal surface area of MgO supported catalysts is proposed. Diff...
Pre-milled copper and tin powder was subjected to heat treatment to investigate the effect of polyet...
The PhD thesis focuses on the performance assessment of permeable pavement systems incorporating gro...
A thermodynamic study of the enthalpy of adsorption of methane on high surface area carbonaceous mat...
Tesis doctoral inédita, leída en la Universidad Autónoma de Madrid, Facultad de Ciencias, Departamen...
The ultimate goal of the CAMEA concept is to reach a high analysing efficiency. This can be achieved...
The present work is aimed at designing novel organometallic push-pull species. To this end, differen...
Physical adsorption of hydrogen or other chemical fuels on the surface of carbonaceous materials off...
The preparation of transition-metal systems for catalytic multielectron transformations of small mol...
The presence of sulphides in many mine wastes and the formation of acid mine drainages (AMD) has bee...
The one-pot conversion of xylose into γ-gammavalerolactone in 2-propanol over bifunctional Zr-Al-Bet...
The one-pot conversion of xylose into γ-gammavalerolactone in 2-propanol over bifunctional Zr-Al-Bet...
The one-pot conversion of xylose into γ-gammavalerolactone in 2-propanol over bifunctional Zr-Al-Bet...
The one-pot conversion of xylose into γ-gammavalerolactone in 2-propanol over bifunctional Zr-Al-Bet...
To address the world’s need for improved biomass breakdown for the production of renewable fuel, we ...
A new method for determining the Ni0 metal surface area of MgO supported catalysts is proposed. Diff...
Pre-milled copper and tin powder was subjected to heat treatment to investigate the effect of polyet...
The PhD thesis focuses on the performance assessment of permeable pavement systems incorporating gro...
A thermodynamic study of the enthalpy of adsorption of methane on high surface area carbonaceous mat...
Tesis doctoral inédita, leída en la Universidad Autónoma de Madrid, Facultad de Ciencias, Departamen...
The ultimate goal of the CAMEA concept is to reach a high analysing efficiency. This can be achieved...
The present work is aimed at designing novel organometallic push-pull species. To this end, differen...