Study of the corrosion products formed on a multiphase CuAlBe alloy in a sodium chloride solution by micro-Raman and in situ AFM measurements

The corrosion products formed on a multiphase Cu–11.40Al–0.55Be (wt.%) alloy in 3.5% NaCl at open circuit potential, and their evolution with immersion time were studied mainly by micro-Raman and in situ AFM measurements. The aluminium content of each phase affects the formation of the corrosion products on them. After 1 day of immersion, γ2 precipitates were more susceptible to dealuminization, while α′ phase exhibited a high corrosion stability. The corrosion products evolved with immersion time, and CuCl2 and a Cu2O/CuO double layer film were the stable products formed on all the phases after long times.Fil: Montecinos Espinoza, Susana de Los Angeles. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones En Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones En Ciencia y Tecnología de Materiales; ArgentinaFil: Simison, Silvia Noemi. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones En Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones En Ciencia y Tecnología de Materiales; Argentin