This paper evaluates the slag characteristics on the reaction kinetics, reaction products and mechanical properties of sodium carbonate activated slag (SCAS). The results show that, by reducing the slag particle size, the precipitation of strength-giving phase of SCAS can be dramatically accelerated, and the time to reach the reaction peak (TRRP) can be accelerated from 86 h to 23 h and a 3 d-compressive strength of about 34 MPa is achieved. The fresh behaviour of pastes is affected by the initial precipitation of calcium carbonate and the formation of gaylussite is also accelerated when reducing the particle sizes of slags. It is observed that the early strength development of samples is largely controlled by the fineness of slag particles...
This study provides a detailed investigation on the reproducibility of two groups of alkali-activate...
The study focuses on developing a detailed understanding of microstructure and mechanical behaviour ...
The technology of alkaline activation of calcium aluminosilicate materials, as an alternative to Por...
This paper evaluates the slag characteristics on the reaction kinetics, reaction products and mechan...
\u3cp\u3eThis paper evaluates the slag characteristics on the reaction kinetics, reaction products a...
This paper evaluates the slag characteristics on the reaction kinetics, reaction products and mechan...
This paper investigates the potential of combining Na2CO3 and reactive MgO as a sustainable activato...
The effects of limestone powder (LP) on the performance of Portland cement based composites have bee...
This paper investigates the possibility of accelerating the slowly progressive early reaction proces...
This study aims to investigate the time-dependent characteristics of sodium carbonate activated slag...
Journal paperSummarization: This study aims to model grinding of a Polish ferronickel slag and evalu...
This study investigates the reaction kinetics, the reaction products and the compressive strength of...
Extensive research into alkali-activated slag as a green gel material to substitute for cement has b...
This study focused on the engineering properties of alkali-activated slag (AAS) pastes prepared by m...
This study collected four ground granulated blast furnace slags from different manufacturing locatio...
This study provides a detailed investigation on the reproducibility of two groups of alkali-activate...
The study focuses on developing a detailed understanding of microstructure and mechanical behaviour ...
The technology of alkaline activation of calcium aluminosilicate materials, as an alternative to Por...
This paper evaluates the slag characteristics on the reaction kinetics, reaction products and mechan...
\u3cp\u3eThis paper evaluates the slag characteristics on the reaction kinetics, reaction products a...
This paper evaluates the slag characteristics on the reaction kinetics, reaction products and mechan...
This paper investigates the potential of combining Na2CO3 and reactive MgO as a sustainable activato...
The effects of limestone powder (LP) on the performance of Portland cement based composites have bee...
This paper investigates the possibility of accelerating the slowly progressive early reaction proces...
This study aims to investigate the time-dependent characteristics of sodium carbonate activated slag...
Journal paperSummarization: This study aims to model grinding of a Polish ferronickel slag and evalu...
This study investigates the reaction kinetics, the reaction products and the compressive strength of...
Extensive research into alkali-activated slag as a green gel material to substitute for cement has b...
This study focused on the engineering properties of alkali-activated slag (AAS) pastes prepared by m...
This study collected four ground granulated blast furnace slags from different manufacturing locatio...
This study provides a detailed investigation on the reproducibility of two groups of alkali-activate...
The study focuses on developing a detailed understanding of microstructure and mechanical behaviour ...
The technology of alkaline activation of calcium aluminosilicate materials, as an alternative to Por...