The main aim of the investigation is to design rear suspension and to improve the dynamic characteristics of the vehicle. Three types of rear suspensions that consist of a leaf spring, a hydraulic and a pneumatic damper, an air spring are designed. The dynamic models of the quarter car with these rear suspensions are presented. Random disturbance of particular road surface is played back by using a spectral density and Monte Carlo method. Natural frequencies of rear suspension are presented. The dependence of standard deviations of the first, the second and the third derivates of particular random displacements on the vehicle speed is obtained. Dynamic characteristics of three rear suspensions are compared and the best rear suspension is d...
This thesis considers the transient response of suspension models of a vehicle traversing a versed-s...
This study provides basic information on the analysis and optimization of vehicle suspension systems...
The subject of the paper are forced vibrations of the rear suspension of the biaxial vehicle fitted ...
The main aim of the investigation is to design rear suspension and to improve the dynamic characteri...
is popular to retrofit cargo van to passenger mini Bus. Such retrofitting is based on cargo vans, gr...
Abstract: A methodology is presented for optimizing the suspension damping and stiffness parameters ...
The paper presents some new and unreferenced analytical formulae describing the dynamic behaviour of...
Abstract: A half-car model is used to investigate the dynamic response of cars with uncertainty unde...
Dynamic displacement and acceleration responses of cars with uncertain parameters under random road ...
A two dimensional, two degree of freedom vehicle model is studied. A randomly profiled road is assum...
A two-degrees-of-freedom vehicle model incorporating passive, active and semi-active suspensions was...
A front suspension of Hyundai Elantra 1992 model is assigned as quarter car model and is considered ...
AbstractRoad vehicles are subject to random excitation by the unevenness of the road. For a dynamica...
A methodology is presented for optimising the suspension damping and stiffness parameters of quarter...
Some of the fundamental limitations and trade-offs regard-ing the capabilities of vehicle suspension...
This thesis considers the transient response of suspension models of a vehicle traversing a versed-s...
This study provides basic information on the analysis and optimization of vehicle suspension systems...
The subject of the paper are forced vibrations of the rear suspension of the biaxial vehicle fitted ...
The main aim of the investigation is to design rear suspension and to improve the dynamic characteri...
is popular to retrofit cargo van to passenger mini Bus. Such retrofitting is based on cargo vans, gr...
Abstract: A methodology is presented for optimizing the suspension damping and stiffness parameters ...
The paper presents some new and unreferenced analytical formulae describing the dynamic behaviour of...
Abstract: A half-car model is used to investigate the dynamic response of cars with uncertainty unde...
Dynamic displacement and acceleration responses of cars with uncertain parameters under random road ...
A two dimensional, two degree of freedom vehicle model is studied. A randomly profiled road is assum...
A two-degrees-of-freedom vehicle model incorporating passive, active and semi-active suspensions was...
A front suspension of Hyundai Elantra 1992 model is assigned as quarter car model and is considered ...
AbstractRoad vehicles are subject to random excitation by the unevenness of the road. For a dynamica...
A methodology is presented for optimising the suspension damping and stiffness parameters of quarter...
Some of the fundamental limitations and trade-offs regard-ing the capabilities of vehicle suspension...
This thesis considers the transient response of suspension models of a vehicle traversing a versed-s...
This study provides basic information on the analysis and optimization of vehicle suspension systems...
The subject of the paper are forced vibrations of the rear suspension of the biaxial vehicle fitted ...