The Influence of Hot Compression on the Surface Characteristics of Poplar Veneer

The surface characteristics of wood veneer are inevitably influenced by hot compression treatment, which is crucial to bonding ability in the production of veneer-based composites such as plywood and laminated veneer lumber (LVL). The objective of this study was to investigate the effect of compression at the temperature of 120 °C on the surface roughness, surface element compositions, and surface free energy (SFE) of poplar veneer. The results showed that the surface roughness of veneer decreased with increasing compression ratio (CR). X-ray photoelectron spectroscopy (XPS) analysis indicated that the oxygen to carbon atoms ratio (O/C ratio) of the veneer surface decreased, while the carbon C1 to C2 atoms ratio (C1/C2 ratio) increased due to hot compression. The SFE of veneer increased by 12% at the CR level of 11%. The improvement in wettability was mainly due to the interfacial contact area increase of the hydrophilic veneer and the decrease in hydrophobic air in the liquid-veneer interface as the CR level increased