The LEAM DVT Thermal tests were conducted 15 March through 23 March 1971 in the NRC 4' x 8' thermal vacuum chamber located in plant 2. Sixteen thermal conditions were imposed on the DVT model encompassing Survival, Night, Sunset, and Noon cases. Temperature data from these tests was used to update the thermal model which in turn was used to update the design of the LEAM qualification model.prepared by L. S. Mills
A new generation of landers, mobility systems, and science instruments are in development for the re...
This ATM presents test data for the ALSEP Qual SA Central Station and pallet 2 RTG packages and comp...
A simulation chamber has been developed to test the performance of thermal control surfaces under du...
The Lunar Ejecta and Meteorites Experiment (LEAM) thermal design is a result of thermal math model d...
This ATM summarizes the LEAM thermal control design, analysis and test program including the DVT T/V...
An investigation was conducted to determine why the temperature of the Lunar Ejecta and Meteorites E...
A functional test of the mechanical features used for release of folding mechanisms and deployment o...
This revision A is to provide the LMS project group with additional data requested of them during th...
This ATM summarizes the analytical and test results of the Lunar Mass Spectrometer thermal control s...
The purpose of the test is to provide thermal vacuum test data to allow computation of the film temp...
This ATM presents the ALSEP/Cask/LM Cask Cooling and Thermal Vacuum Qualification test results which...
The compiled reports contained herein represent the total data accumulated in the testing of the LMS...
This ATM Summarizes the analytical and test results of the Lunar Seismic Profiling Experiment Therma...
This ATM presents the results of the dynamic analysis and testing performed on the DVT model of the ...
This ATM gives the results of the dynamic analysis on the LEAM Flight Model Experiment Package. The ...
A new generation of landers, mobility systems, and science instruments are in development for the re...
This ATM presents test data for the ALSEP Qual SA Central Station and pallet 2 RTG packages and comp...
A simulation chamber has been developed to test the performance of thermal control surfaces under du...
The Lunar Ejecta and Meteorites Experiment (LEAM) thermal design is a result of thermal math model d...
This ATM summarizes the LEAM thermal control design, analysis and test program including the DVT T/V...
An investigation was conducted to determine why the temperature of the Lunar Ejecta and Meteorites E...
A functional test of the mechanical features used for release of folding mechanisms and deployment o...
This revision A is to provide the LMS project group with additional data requested of them during th...
This ATM summarizes the analytical and test results of the Lunar Mass Spectrometer thermal control s...
The purpose of the test is to provide thermal vacuum test data to allow computation of the film temp...
This ATM presents the ALSEP/Cask/LM Cask Cooling and Thermal Vacuum Qualification test results which...
The compiled reports contained herein represent the total data accumulated in the testing of the LMS...
This ATM Summarizes the analytical and test results of the Lunar Seismic Profiling Experiment Therma...
This ATM presents the results of the dynamic analysis and testing performed on the DVT model of the ...
This ATM gives the results of the dynamic analysis on the LEAM Flight Model Experiment Package. The ...
A new generation of landers, mobility systems, and science instruments are in development for the re...
This ATM presents test data for the ALSEP Qual SA Central Station and pallet 2 RTG packages and comp...
A simulation chamber has been developed to test the performance of thermal control surfaces under du...