Effect of moisture content on high strain rate compressibility and particle breakage in loose sand

Soil-filled gabion structures are widely used to protect against the effects of blast and fragmentation. It is known that moisture content significantly affects the capability of such structures, but the behaviour of partially-saturated soils is not well characterised at the strain rates and stresses experienced in these events. In particular, little data is available for loose soils, whose compaction behaviour can have a substantial impact on structural stability and ballistic performance. This paper describes the use of split Hopkinson pressure bar experiments to characterise the pre- and post-saturation compressibility of a loose quartz sand at moisture contents of up to 15.0%. In contrast to dense soils, increases in moisture content between 0.0% and 7.5% led to a decrease in the stiffness of the sand. Above 7.5% moisture content, specimens reached full saturation during the experiment: the additional water had no further effect on the pre-saturation stiffness, but post-saturation behaviour was dominated by the stiffness of the pore water. Full saturation occurred at lower dry densities as moisture content increased, leading to a decrease in particle breakage