CaO has been deposited on a nanosilica powder matrix by a procedure based on atomic layer deposition (ALD) in a fluidized bed reactor at atmospheric pressure following a potentially scalable process. In previous works ALD in gas fluidized bed has been mostly performed under reduced pressure, which hampers scaling-up the production technology. The material synthesized in the present work is tested as CO2 solid sorbent at calcium looping conditions. Multicyclic thermogravimetric analysis (TGA) shows that the nanosilica support stabilizes the capture capacity of CaO. EDX-STEM analysis illustrates the presence of Ca well distributed on the surface of the SiO2 nanoparticles.Junta de Andalucía FQM-5735 TEP-7858España Ministerio de Ciencia e Innov...
AbstractIn this paper, a new synthesis method to obtain mixed CaO/Ca12Al14O33 solids for high temper...
[[abstract]]This study develops a modified CaO-based mesoporous CO2 sorbent with high sorption capac...
In this work we report the development of a Ca-based, Al<sub>2</sub>O<sub>3</sub>-stabilized sorbent...
This work presents a CO2 sorbent that may be synthesized from low-cost and widely available material...
The integration of a CaO-based CO2 sorbent into catalytic schemes to remove CO2 from the product str...
High-temperature sorption of CO via calcium looping has wide applications in postcombustion carbon c...
A CaO sorbent with high reactivity for cyclic high temperature CO capture was synthesized using a st...
High-temperature sorption of CO<sub>2</sub> via calcium looping has wide applications in postcombust...
Calcium-looping technology has been identified as one of the most favorable CO capture techniques fo...
A screening of potential calcium precursors for the production of CaO sorbents for CO capture at hig...
Calcium oxide-based sorbents were coated onto Saffil ceramic fibres by means of a wet impregnation m...
AbstractA method for manufacturing high-temperature CO2 sorbents using TiO2 nanoparticles with calci...
Ca-based, MgAl2O4-stabilized sorbents for CO2 capture were prepared using a sol-gel approach. The ch...
A hollow structured CaO sorbent with high CO2 absorption capacity and good cyclic performance at hig...
Calcium oxide (CaO) sorbents have been recently used for removal of CO2 gases in fossil fuel-fired p...
AbstractIn this paper, a new synthesis method to obtain mixed CaO/Ca12Al14O33 solids for high temper...
[[abstract]]This study develops a modified CaO-based mesoporous CO2 sorbent with high sorption capac...
In this work we report the development of a Ca-based, Al<sub>2</sub>O<sub>3</sub>-stabilized sorbent...
This work presents a CO2 sorbent that may be synthesized from low-cost and widely available material...
The integration of a CaO-based CO2 sorbent into catalytic schemes to remove CO2 from the product str...
High-temperature sorption of CO via calcium looping has wide applications in postcombustion carbon c...
A CaO sorbent with high reactivity for cyclic high temperature CO capture was synthesized using a st...
High-temperature sorption of CO<sub>2</sub> via calcium looping has wide applications in postcombust...
Calcium-looping technology has been identified as one of the most favorable CO capture techniques fo...
A screening of potential calcium precursors for the production of CaO sorbents for CO capture at hig...
Calcium oxide-based sorbents were coated onto Saffil ceramic fibres by means of a wet impregnation m...
AbstractA method for manufacturing high-temperature CO2 sorbents using TiO2 nanoparticles with calci...
Ca-based, MgAl2O4-stabilized sorbents for CO2 capture were prepared using a sol-gel approach. The ch...
A hollow structured CaO sorbent with high CO2 absorption capacity and good cyclic performance at hig...
Calcium oxide (CaO) sorbents have been recently used for removal of CO2 gases in fossil fuel-fired p...
AbstractIn this paper, a new synthesis method to obtain mixed CaO/Ca12Al14O33 solids for high temper...
[[abstract]]This study develops a modified CaO-based mesoporous CO2 sorbent with high sorption capac...
In this work we report the development of a Ca-based, Al<sub>2</sub>O<sub>3</sub>-stabilized sorbent...