Forest Above-Ground Biomass Estimation Using Single-Baseline Polarization Coherence Tomography with P-Band PolInSAR Data

Forest above ground biomass (AGB) extraction using Synthetic Aperture Radar (SAR) images has been widely used in global carbon cycle research. Classical AGB inversion methods using SAR images are mainly based on backscattering coefficients. The polarization coherence tomography (PCT) technology which can generate vertical profiles of forest relative reflectivity, has the potential to improve the accuracy of biomass inversion. The relationship between vertical profiles and forest AGB is modeled by some parameters defined based on geometric characteristics of the relative reflectivity distribution curve. But these parameters are defined without physical characteristics. Among these parameters, tomographic height (TomoH) is considered as the most important one. However, TomoH only corresponds to the highest volume relative reflectivity, which is lower than the actual forest height, affecting the accuracy of forest height and AGB inversion. In this paper, we introduce a new parameter, the canopy height (Hac), for AGB inversion by analyzing the vertical backscatter power loss. Then, we construct an inversion model based on the combination of the new parameter (Hac) and other parameters from the tomographic profile. The P-band polarimetric SAR datasets of the European Space Agency (ESA) BioSAR 2008 campaign acquired over Krycklan Catchment are selected for the verification experiment at two different flight directions. The results show that Hac performs better in estimating forest height and AGB than TomoH does. The inversion root mean square error (RMSE) of the proposed method is 18.325 t ha−1, and the result of using TomoH is 21.126 t ha−1