Add to ORKGThe presenting company provided data for typical operating parameters used in dragline operation. The problem for the Study Group was to investigate whether an optimal model of dragline operation could be developed. The Study Group modelled the sequence of operations for a typical surface mining strip. Overall, a simulation approach seems necessary to fully represent the dragline operation. Some aspects of the operations that are amenable to optimisation are described in this report
435-443This paper deals with extended bench casting with draglines in surface coalmines. A computer ...
Draglines are the most expensive pieces of equipment used in coal mines at a cost of $50 M to $100M ...
This paper describes a simulation of a machine designed to strip overburden* from coal deposits. The...
During recent years, the Australian coal industry has increasingly used large walking draglines as t...
Draglines are an expensive and essential part of open cut coal mining. Small improvements in perform...
The presenting company provided data on the performance of a dragline over a four-week period during...
Dragline operations in the Australian coal industry are now working deeper and more complex pits. Fu...
Draglines have been explicitly used in coal mining for a no. of decades, either as stripper or strip...
Draglines are among the largest earthmoving machines in surface mining, where they are used to remov...
Draglines have been abundantly used in coal mining for decades, either as stripper or stripper and c...
Draglines are gigantic excavators commonly used to remove overburden that sits above a target minera...
This study presents the results of a computer-based model developed for analysing the pit geometry f...
The contribution of coal to global energy is expected to remain above 30% through 2030. Draglines ar...
Draglines have been abundantly used in coal mining for decades, either as stripper or stripper and c...
The cause of energy conservation can be served by increasing the efficiency of large draglines used ...
435-443This paper deals with extended bench casting with draglines in surface coalmines. A computer ...
Draglines are the most expensive pieces of equipment used in coal mines at a cost of $50 M to $100M ...
This paper describes a simulation of a machine designed to strip overburden* from coal deposits. The...
During recent years, the Australian coal industry has increasingly used large walking draglines as t...
Draglines are an expensive and essential part of open cut coal mining. Small improvements in perform...
The presenting company provided data on the performance of a dragline over a four-week period during...
Dragline operations in the Australian coal industry are now working deeper and more complex pits. Fu...
Draglines have been explicitly used in coal mining for a no. of decades, either as stripper or strip...
Draglines are among the largest earthmoving machines in surface mining, where they are used to remov...
Draglines have been abundantly used in coal mining for decades, either as stripper or stripper and c...
Draglines are gigantic excavators commonly used to remove overburden that sits above a target minera...
This study presents the results of a computer-based model developed for analysing the pit geometry f...
The contribution of coal to global energy is expected to remain above 30% through 2030. Draglines ar...
Draglines have been abundantly used in coal mining for decades, either as stripper or stripper and c...
The cause of energy conservation can be served by increasing the efficiency of large draglines used ...
435-443This paper deals with extended bench casting with draglines in surface coalmines. A computer ...
Draglines are the most expensive pieces of equipment used in coal mines at a cost of $50 M to $100M ...
This paper describes a simulation of a machine designed to strip overburden* from coal deposits. The...