High temperature flexural and oxidation behavior of hot-pressed B4C-ZrB2 ceramics with various ZrB2 addition amounts was measured and analyzed in the temperature range of 1000 to 1600 degrees C in ambient air atmosphere. The high temperature flexural strength is a strong function of temperature. With the temperature increasing, the high temperature flexural strength decreases. The oxidation behavior was investigated in detail, and the oxidation mechanism was summarized. The purpose of this study is to give fundamental understanding of the high temperature behavior of B4C based ceramics. (C) 2016 Elsevier Ltd. All rights reserved.National Science Foundation of China [11402003]; Beijing Institute of Technology Research Fund Program for Youn...
The strength of zirconium diboride (ZrB2) ceramics was measured up to 2300°C, which are the first re...
The mechanical properties of a nominally phase pure ZrB2 ceramic were measured up to 2300°C in an ar...
B4C-ZrB2 ceramics with different ZrB2 contents were fabricated using hot-pressing technique. The int...
B4C-30 vol% ZrB2 ceramic was prepared using hot pressing. The room temperature and high temperature ...
Pre-oxidation is an effective method to eliminate machining damages and to improve mechanical proper...
ZrB2 based ultra-high temperature ceramic (UHTC) is one of the most promising materials for thermal ...
Nearly fully dense ZrB2-SiC-graphite composites were fabricated from commercially available powder a...
ZrB 2-SiC-TaC ceramics with different content of TaC were prepared by hot-pressing at 1800°C in vacu...
ZrB2-SiC-BN ceramics were fabricated by hot-pressing under argon at 1800 degrees C and 23MPa pressur...
ZrB2SiCTaC ceramics with different content of TaC were prepared by hot-pressing at 1800 degrees C in...
ZrB 2-SiC-TaC ceramics with different content of TaC were prepared by hot-pressing at 1800°C in vacu...
The oxidation behaviour and the effect of oxidation on the room-temperature flexural strength of B4C...
Dense ZrB2-20 vol% SiC ceramics (ZS) were fabricated by hot pressing using self-synthesized high pur...
ZrB₂–20 vol% SiC (ZS) ceramics based on ZrB₂ starting powders obtained by different boro/carbo-therm...
A critical point in the development of future generation space vehicles is the availability of mater...
The strength of zirconium diboride (ZrB2) ceramics was measured up to 2300°C, which are the first re...
The mechanical properties of a nominally phase pure ZrB2 ceramic were measured up to 2300°C in an ar...
B4C-ZrB2 ceramics with different ZrB2 contents were fabricated using hot-pressing technique. The int...
B4C-30 vol% ZrB2 ceramic was prepared using hot pressing. The room temperature and high temperature ...
Pre-oxidation is an effective method to eliminate machining damages and to improve mechanical proper...
ZrB2 based ultra-high temperature ceramic (UHTC) is one of the most promising materials for thermal ...
Nearly fully dense ZrB2-SiC-graphite composites were fabricated from commercially available powder a...
ZrB 2-SiC-TaC ceramics with different content of TaC were prepared by hot-pressing at 1800°C in vacu...
ZrB2-SiC-BN ceramics were fabricated by hot-pressing under argon at 1800 degrees C and 23MPa pressur...
ZrB2SiCTaC ceramics with different content of TaC were prepared by hot-pressing at 1800 degrees C in...
ZrB 2-SiC-TaC ceramics with different content of TaC were prepared by hot-pressing at 1800°C in vacu...
The oxidation behaviour and the effect of oxidation on the room-temperature flexural strength of B4C...
Dense ZrB2-20 vol% SiC ceramics (ZS) were fabricated by hot pressing using self-synthesized high pur...
ZrB₂–20 vol% SiC (ZS) ceramics based on ZrB₂ starting powders obtained by different boro/carbo-therm...
A critical point in the development of future generation space vehicles is the availability of mater...
The strength of zirconium diboride (ZrB2) ceramics was measured up to 2300°C, which are the first re...
The mechanical properties of a nominally phase pure ZrB2 ceramic were measured up to 2300°C in an ar...
B4C-ZrB2 ceramics with different ZrB2 contents were fabricated using hot-pressing technique. The int...