The structural, magnetic, and electrotransport properties of a metallic granular FexCu1-x alloys (x = 0.0.35) were studied. These alloys were fabricated by using a coevaporation technique with an extremely high deposition rate. Observations by transmission electron microscope confirmed that these alloys consist of small Fe particles embedded in a Cu matrix. The ferromagnetic-superparamagnetic transition occurs at the blocking temperature. The blocking temperature T(B), dependent on the atomic fraction x of Fe, is in a range of 80-300 K as x = 0.10-0.22. Above T(B), the Fe particles exhibit superparamagnetic relaxation. Their magnetic behavior can be understood based on superparamagnetic theory. At low temperature, the temperature dependence...
The magnetic properties of granular Cu-Co alloys produced by melt-spinning have been investigated by...
Granular alloys of Cu with FeCo were prepared by the melt-spinning technique. The alloy was characte...
CoFe–Cu granular films with ferromagnetic content ranging from 0.10 to 0.33 by volume were prepared ...
We have studied the magnetic, and magnetotransport properties of a metallic granular FexAg1-x alloys...
CoFe–Cu granular films with ferromagnetic content ranging from 0.10 to 0.33 by volume were prepared ...
The magnetoresistance (MR) and magnetization (M) have been measured as functions of temperature, T, ...
Room-temperature measurements of magnetization and giant magnetoresistance were performed on rapidly...
A Cu/Fe granular film, formed from a multilayer film and composed of particles of Fe imbedded in Cu,...
International audienceFexCu100−x metastable alloys were prepared by pulsed electrodeposition for 5x8...
Magnetization and magnetoresistance studies were carried out on the granular Fe(x)Cu(y)Ag(z) films p...
Granular alloys of Cu with FeCo were prepared by the melt-spinning technique. The alloy was characte...
Granular alloys of Cu with FeCo were prepared by the melt-spinning technique. The alloy was characte...
A Cu/Fe granular film, formed from a multilayer film and composed of particles of Fe imbedded in Cu,...
Magnetic granular CoxCu100-x alloys (x = 5-20) have been prepared by melt-spinning acid subsequently...
Magnetic granular CoxCu100-x alloys (x = 5-20) have been prepared by melt-spinning acid subsequently...
The magnetic properties of granular Cu-Co alloys produced by melt-spinning have been investigated by...
Granular alloys of Cu with FeCo were prepared by the melt-spinning technique. The alloy was characte...
CoFe–Cu granular films with ferromagnetic content ranging from 0.10 to 0.33 by volume were prepared ...
We have studied the magnetic, and magnetotransport properties of a metallic granular FexAg1-x alloys...
CoFe–Cu granular films with ferromagnetic content ranging from 0.10 to 0.33 by volume were prepared ...
The magnetoresistance (MR) and magnetization (M) have been measured as functions of temperature, T, ...
Room-temperature measurements of magnetization and giant magnetoresistance were performed on rapidly...
A Cu/Fe granular film, formed from a multilayer film and composed of particles of Fe imbedded in Cu,...
International audienceFexCu100−x metastable alloys were prepared by pulsed electrodeposition for 5x8...
Magnetization and magnetoresistance studies were carried out on the granular Fe(x)Cu(y)Ag(z) films p...
Granular alloys of Cu with FeCo were prepared by the melt-spinning technique. The alloy was characte...
Granular alloys of Cu with FeCo were prepared by the melt-spinning technique. The alloy was characte...
A Cu/Fe granular film, formed from a multilayer film and composed of particles of Fe imbedded in Cu,...
Magnetic granular CoxCu100-x alloys (x = 5-20) have been prepared by melt-spinning acid subsequently...
Magnetic granular CoxCu100-x alloys (x = 5-20) have been prepared by melt-spinning acid subsequently...
The magnetic properties of granular Cu-Co alloys produced by melt-spinning have been investigated by...
Granular alloys of Cu with FeCo were prepared by the melt-spinning technique. The alloy was characte...
CoFe–Cu granular films with ferromagnetic content ranging from 0.10 to 0.33 by volume were prepared ...