We have prepared noncollapsed free-standing porous silicon (PS) films with various porosities even higher than 90% using the electrochemical etching-electropolishing, chemical dissolving, and supercritical drying methods. The result of a study combining optical absorption and photoluminescence (PL) from free-standing PS films with porosities in the range 41-94% is presented. A blue shift of the transmission curves and an increase of the PL intensity with enhancing porosity have been observed. However, no notable blue shift of the PL peak position with increasing porosity has been observed. Furthermore, the square root of the absorption coefficient (alpha) of the PS samples with high porosities times photon energy (hv) vs photon energy can n...
Various explanations have been proposed for the strong visible luminescence from porous silicon (PS...
In this work, we obtained porous silicon with different porosity by electrochemical etching and stud...
We have treated porous silicon (PS) alternatively by chemical etching and laser illumination in air,...
We have obtained free-standing porous silicon films with porosity above 90% by using anodic oxidizin...
We have prepared free-standing porous silicon (FPS) samples with various porosities using electroch...
We have studied the microstructure and optical properties of free-standing porous Si thin films fabr...
Non-radiative processes in porous silicon (PS) have been examined using a variety of techniques to e...
Recently, porous silicon (PS) was intensely studied by researcher due to its photoluminescence (PL)...
We have systematically studied the evolution of the optical properties of free-standing porous silic...
Recent observations of photoluminescene (PL) and electroluminescence (EL) from poroussilicon (PS) ha...
The work in this thesis concentrated on processing and diagnosing porous silicon nanocrystallites t...
The PL intensity increases at first, then, decreases with the increase of processing time and reache...
Light-emitting porous silicon films have been obtained by anodic etching p-type Si samples in a HF-e...
Light‐emitting porous silicon films have been obtained by anodic etching p‐type Si samples in a HF‐e...
Porous silicon (PS) layers come into existance as a result of electrochemical anodization on silic...
Various explanations have been proposed for the strong visible luminescence from porous silicon (PS...
In this work, we obtained porous silicon with different porosity by electrochemical etching and stud...
We have treated porous silicon (PS) alternatively by chemical etching and laser illumination in air,...
We have obtained free-standing porous silicon films with porosity above 90% by using anodic oxidizin...
We have prepared free-standing porous silicon (FPS) samples with various porosities using electroch...
We have studied the microstructure and optical properties of free-standing porous Si thin films fabr...
Non-radiative processes in porous silicon (PS) have been examined using a variety of techniques to e...
Recently, porous silicon (PS) was intensely studied by researcher due to its photoluminescence (PL)...
We have systematically studied the evolution of the optical properties of free-standing porous silic...
Recent observations of photoluminescene (PL) and electroluminescence (EL) from poroussilicon (PS) ha...
The work in this thesis concentrated on processing and diagnosing porous silicon nanocrystallites t...
The PL intensity increases at first, then, decreases with the increase of processing time and reache...
Light-emitting porous silicon films have been obtained by anodic etching p-type Si samples in a HF-e...
Light‐emitting porous silicon films have been obtained by anodic etching p‐type Si samples in a HF‐e...
Porous silicon (PS) layers come into existance as a result of electrochemical anodization on silic...
Various explanations have been proposed for the strong visible luminescence from porous silicon (PS...
In this work, we obtained porous silicon with different porosity by electrochemical etching and stud...
We have treated porous silicon (PS) alternatively by chemical etching and laser illumination in air,...