A novel polyester urethane acrylate resin modified by linseed oil fatty acid (LFA) was synthesized and EB curing coating was formulated in this work. When the coating cured by EB radiation on the timber, the cured coating was possessed of good performances. (C) 1999 Elsevier Science Ltd. All rights reserved.Chemistry, PhysicalNuclear Science & TechnologyPhysics, Atomic, Molecular & ChemicalSCI(E)EI1ARTICLE199-1015
ABSTRACT Most of the medium-density fiberboard (MDF) as an engineered woods need sUl1acecoating proc...
ABSTRACT Most of the medium-density fiberboard (MDF) as an engineered woods need sUl1acecoating proc...
This study investigated the feasibility of using an electron beam (EB) process to cure chemically im...
Preparation of the monomer modified by phospite is described. According to the results of IR, MS and...
Trends in wood coatings are driven to waterborne systems and to renewable resources. Vegetable oils ...
International audienceThe present work focused on the development of a partially bio-based polymer m...
Depletion of petroleum reserves and increasing environmental concerns have stimulated the efforts to...
Of late, UV-curable products are gaining attention in the wood industry because of the effectiveness...
Palm fatty acid distillate (PFAD), is a by-product of the crude palm oil refining process. It compri...
合成了5种不同结构的亚麻油醇酸改性丙烯酸聚氨酯,并研究了它们的电子束固化涂膜的附着力、光泽、柔韧性、耐冲击性、硬度、抗张强度和伸长率等性能.试验表明:亚麻油醇酸改性丙烯酸聚氨酯的合成反应条件温和;随着...
The linseed oil glyceride (LOG) was synthesized by using a transesterification process with a glycer...
UV-curable acrylates are the base for a large and growing product group within the coatings industry...
The market for radiation curing in coatings exhibited a significant continuous rise during the past ...
The polymerization and properties of environmentally friendly waterborne binders for wood coatings w...
The development of polyurethane with hydroxyl access in a molecule leads to a new alternative of low...
ABSTRACT Most of the medium-density fiberboard (MDF) as an engineered woods need sUl1acecoating proc...
ABSTRACT Most of the medium-density fiberboard (MDF) as an engineered woods need sUl1acecoating proc...
This study investigated the feasibility of using an electron beam (EB) process to cure chemically im...
Preparation of the monomer modified by phospite is described. According to the results of IR, MS and...
Trends in wood coatings are driven to waterborne systems and to renewable resources. Vegetable oils ...
International audienceThe present work focused on the development of a partially bio-based polymer m...
Depletion of petroleum reserves and increasing environmental concerns have stimulated the efforts to...
Of late, UV-curable products are gaining attention in the wood industry because of the effectiveness...
Palm fatty acid distillate (PFAD), is a by-product of the crude palm oil refining process. It compri...
合成了5种不同结构的亚麻油醇酸改性丙烯酸聚氨酯,并研究了它们的电子束固化涂膜的附着力、光泽、柔韧性、耐冲击性、硬度、抗张强度和伸长率等性能.试验表明:亚麻油醇酸改性丙烯酸聚氨酯的合成反应条件温和;随着...
The linseed oil glyceride (LOG) was synthesized by using a transesterification process with a glycer...
UV-curable acrylates are the base for a large and growing product group within the coatings industry...
The market for radiation curing in coatings exhibited a significant continuous rise during the past ...
The polymerization and properties of environmentally friendly waterborne binders for wood coatings w...
The development of polyurethane with hydroxyl access in a molecule leads to a new alternative of low...
ABSTRACT Most of the medium-density fiberboard (MDF) as an engineered woods need sUl1acecoating proc...
ABSTRACT Most of the medium-density fiberboard (MDF) as an engineered woods need sUl1acecoating proc...
This study investigated the feasibility of using an electron beam (EB) process to cure chemically im...