Effect of membrane polymeric materials on relationship between surface pore size and membrane fouling in membrane bioreactors

We investigated the effect of different membrane polymeric materials on the relationship between membrane pore size and development of membrane fouling in a membrane bioreactor (MBR). Membranes with different pore sizes were prepared using three different polymeric materials, cellulose acetate butyrate (CAB), polyvinyl butyral (PVB), and polyvinylidene fluoride (PVDF), and the development of membrane fouling in each membrane was evaluated by batch filtration tests using a mixed liquor suspension obtained from a laboratory-scale MBR. The results revealed that the optimal membrane pore size to mitigate membrane fouling differed depending on membrane polymeric material. For PVDF membranes, the degree of membrane fouling decreased as membrane pore size increased. In contrast, CAB membranes with smaller pores had less fouling propensity than those with larger ones. Such difference can be attributed to the difference in major membrane foulants in each membrane; in PVDF, they were small colloids or dissolved organics in which proteins are abundant, and in CAB, microbial flocs. The results obtained in this study strongly suggested that optimum operating conditions of MBRs differ depending on the characteristics of the used membrane. (C) 2015 Elsevier B.V. All rights reserved.Chemistry, PhysicalMaterials Science, Coatings & FilmsPhysics, AppliedPhysics, Condensed MatterSCI(E)EI0ARTICLEt-miyoshi@pegasus.kobe-u.ac.jp; k.yuasa06@gmail.com; ishigami.toru@nihon-u.ac.jp; rajabzadehk@people.kobe-u.ac.jp; e-kamio@people.kobe-u.ac.jp; yoshikage.ohmukai@daikin.co.jp; dsk.saeki@garnet.kobe-u.ac.jp; jinrenni@pku.edu.cn; matuyama@kobe-u.ac.jpC351-35733