Mechanism of combination membrane and electro-winning process on treatment and remediation of Cu2+ polluted water body

Mechanism of treatment and remediation of synthetic Cu2+ polluted water body by membrane and electro-winning combination process was investigated. The influences of electrolysis voltage, pH, and electrolysis time on the metal recovery efficiencies were studied. Relationship between trans-membrane pressure drop (Delta P), additions ratio, initial Cu2+ concentration on operating efficiency, stability of membrane and the possibility of water reuse were also investigated. The morphology of membrane and electrodes were observed using scanning electron microscopy (SEM), the composition of surface deposits was ascertained using combined energy dispersive X-ray spectroscopy (EDX) and atomic absorption spectrophotometer. The results showed that using low pressure reverse osmosis (LPRO), Cu2+ concentration could increase from 20 to 100 mg/L or even higher in concentrated solutions and permeate water conductivity could be less than 20 mu S/cm. The addition of sodium dodecy/sulfate sodium dodecyl sulfate improved Cu2+ removal efficiency, while EDTA had little side influence. In electro-reduction process, using plante electrode cell, Cu2+ concentration could be further reduced to 5 mg/L, and the average current efficiency ranged from 9% to 40%. Using 3D electrolysis treatment, Cu2+ concentration could be reduced to 0.5 mg/L with a current efficiency range 60%-70%.http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000266943600010&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=8e1609b174ce4e31116a60747a720701Environmental SciencesSCI(E)EIPubMed中国科技核心期刊(ISTIC)11ARTICLE6764-7692