Effects of such additives as Co, Zr, Nb or Ga on hydrogen absorption and desorption characteristics of Nd(Fe, Mo)(12) alloys are investigated. It is found that Zr or Nb addition increases the disproportionation temperature of Nd(Fe, Mo)(12) alloys, and Co or Ga addition decreases the recombined temperature of its disproportionated products. This shows that Zr or Nb addition retards the disproportionation, while Co or Ga addition is effective for improving the recombination, which is similar to the effects of the additives on the hydrogen absorption and desorption characteristics of Nd(2)Fe(14)B alloys. However, according to X-ray diffraction (XRD) investigations for the magnetic-oriented samples, the final hydrogenation disproportiontation ...
The effect of Fe on hydrogenation behavior of 2:17 type SmCo alloys was investigated. The as-cast Sm...
YMgNi4-based alloys exhibit reversible hydrogen absorption and desorption reactions at near room tem...
In this work, Mg was employed as a starting material. Ni, Fe and Ti were selected as additives to im...
International audienceHighly coercive Nd-Fe-B powders for bonded magnets have been successfully prod...
International audienceHighly coercive Nd-Fe-B powders for bonded magnets have been successfully prod...
An investigation into the effect of Zr addition and Co and Ni substitution in Nd_2Fe_1_4B-based allo...
Effects of the heat treatment conditions of the disproportionation stage on magnetic properties of h...
The hydrogen absorption and desorption properties of the amorphous Zr_Ni_T_ (TM=Ti, V, Cr, Mn and Fe...
In this paper the Hydrogenation, Disproportionation, Desorption and Recombination (HDDR) route was t...
Hydrogen disproportionation (HD) treatments at 820°C for 10 h with different hydrogen pressures (PHD...
Microstructure evolution in Nd12.8Fe80.1B6.6Ga0.3Nb0.2 alloy powders at different hydrogen pressures...
The effect of the desorption-recombination temperature on the microstructure and magnetic properties...
Microstructural changes of NdFe10.5Mo1.5 and Pr13Fe80B7 compounds during the solid-hydrogenation dis...
As a step to understand the kinetics and mechanisms of hydrogen ab/desorption by/from hydrogen stora...
Effects of the disproportionation time on the anisotropy and the microstructures of Nd13Fe80B7 alloy...
The effect of Fe on hydrogenation behavior of 2:17 type SmCo alloys was investigated. The as-cast Sm...
YMgNi4-based alloys exhibit reversible hydrogen absorption and desorption reactions at near room tem...
In this work, Mg was employed as a starting material. Ni, Fe and Ti were selected as additives to im...
International audienceHighly coercive Nd-Fe-B powders for bonded magnets have been successfully prod...
International audienceHighly coercive Nd-Fe-B powders for bonded magnets have been successfully prod...
An investigation into the effect of Zr addition and Co and Ni substitution in Nd_2Fe_1_4B-based allo...
Effects of the heat treatment conditions of the disproportionation stage on magnetic properties of h...
The hydrogen absorption and desorption properties of the amorphous Zr_Ni_T_ (TM=Ti, V, Cr, Mn and Fe...
In this paper the Hydrogenation, Disproportionation, Desorption and Recombination (HDDR) route was t...
Hydrogen disproportionation (HD) treatments at 820°C for 10 h with different hydrogen pressures (PHD...
Microstructure evolution in Nd12.8Fe80.1B6.6Ga0.3Nb0.2 alloy powders at different hydrogen pressures...
The effect of the desorption-recombination temperature on the microstructure and magnetic properties...
Microstructural changes of NdFe10.5Mo1.5 and Pr13Fe80B7 compounds during the solid-hydrogenation dis...
As a step to understand the kinetics and mechanisms of hydrogen ab/desorption by/from hydrogen stora...
Effects of the disproportionation time on the anisotropy and the microstructures of Nd13Fe80B7 alloy...
The effect of Fe on hydrogenation behavior of 2:17 type SmCo alloys was investigated. The as-cast Sm...
YMgNi4-based alloys exhibit reversible hydrogen absorption and desorption reactions at near room tem...
In this work, Mg was employed as a starting material. Ni, Fe and Ti were selected as additives to im...