Microanalyses of the reverse-bias leakage current increase in the laser lift off (LLO) GaN-based light emitting diodes were performed. It was found that the amount of dislocations did not obviously change after LLO process in our experiments. The conductive-atomic force microscopy images and transmission electron microscope (TEM) images results revealed that almost all screw dislocations became to be related with leakage current and the current intensity increased over 100 times after the LLO process; however, only nanopipes corresponded to leakage current in the sample without the laser irradiation. Scanning TEM images indicated microstructure changes induced by LLO process. Amount of point defects around dislocations might be responsible ...
This paper presents an extensive analysis of the degradation of InGaN-based laser diodes submitted t...
In this paper, recent progresses in optical analysis of dislocation-related physical properties in G...
We combine two scanning electron microscopy techniques to investigate the influence of dislocations ...
The influences of the laser lift-off (LLO) process on the InGaN/GaN blue light emitting diode (LED) ...
Conventional GaN-based light-emitting diodes (LEDs) on sapphire substrates and laser lift-off (LLO) ...
Despite the recent progresses in the technology of GaN-based laser diodes (LDs), there is a number o...
We present an investigation of the degradation of InGaN/GaN laser diodes grown on a GaN substrate. T...
With this paper we describe recent results on the physical mechanisms responsible for the gradual de...
ABSTRACT: In spite of the theoretical advantages associated with nitride microcavities, the quality ...
Measurements of light-output power versus current are performed for GaInN/GaN light-emitting diodes ...
High spatial resolution cathodoluminescence (CL) mapping studies were carried out in GaN based mater...
Despite a high dislocation density and a strong polarization effect, during the past two decades, Ga...
Dislocation-related conduction paths in n-type GaN grown by molecular-beam epitaxy and a mechanism f...
Local dot-like emissions in InGaN/GaN-based light-emitting diodes under both forward and reverse bia...
We review the dominant mechanism and characteristics which give rise to the existence of forward and...
This paper presents an extensive analysis of the degradation of InGaN-based laser diodes submitted t...
In this paper, recent progresses in optical analysis of dislocation-related physical properties in G...
We combine two scanning electron microscopy techniques to investigate the influence of dislocations ...
The influences of the laser lift-off (LLO) process on the InGaN/GaN blue light emitting diode (LED) ...
Conventional GaN-based light-emitting diodes (LEDs) on sapphire substrates and laser lift-off (LLO) ...
Despite the recent progresses in the technology of GaN-based laser diodes (LDs), there is a number o...
We present an investigation of the degradation of InGaN/GaN laser diodes grown on a GaN substrate. T...
With this paper we describe recent results on the physical mechanisms responsible for the gradual de...
ABSTRACT: In spite of the theoretical advantages associated with nitride microcavities, the quality ...
Measurements of light-output power versus current are performed for GaInN/GaN light-emitting diodes ...
High spatial resolution cathodoluminescence (CL) mapping studies were carried out in GaN based mater...
Despite a high dislocation density and a strong polarization effect, during the past two decades, Ga...
Dislocation-related conduction paths in n-type GaN grown by molecular-beam epitaxy and a mechanism f...
Local dot-like emissions in InGaN/GaN-based light-emitting diodes under both forward and reverse bia...
We review the dominant mechanism and characteristics which give rise to the existence of forward and...
This paper presents an extensive analysis of the degradation of InGaN-based laser diodes submitted t...
In this paper, recent progresses in optical analysis of dislocation-related physical properties in G...
We combine two scanning electron microscopy techniques to investigate the influence of dislocations ...