This MD note summarizes the measurements performed to study persistent longitudinal oscillations after injection into the LHC. It was found that they build up due to mismatch, and can lead to particle losses and uncontrolled bunch lengthening. For the first time, profile measurements and ObsBox data acquisitions were triggered at injection to obtain first-turn data. The measurements took place on 16th September 2017 between 14:30 and 19:30, and between 27th November 2017 20:00 and 28th November 2017 04:00
This note summarises the measurements and observations performed during the LHC Machine Development ...
The PSB was conceived as an intensity booster for fixed-target physics. Consequently, no attempt wa...
On 25 July 2018 partially stripped lead ions with one remaining electron (208Pb81+) were injected, a...
This note summarizes three inter-related machine development sessions that were performed in the LHC...
Long lasting dipole oscillations have been observed at injection in the LHC, with 50 ns bunch spacin...
This note summarizes the results obtained at injection during the 2nd MD block and the floating MD b...
The aim of the MD was to measure the coupled-bunch stability from all HOM impedances, with a reduced...
Losses at injection depend on the beam quality in the longitudinal and transverse plane in the injec...
The aim of the MD was to study the controlled longitudinal emittance blow-up applied during the ramp...
The goal of this MD was to study a single bunch longitudinal instability observed during the acceler...
This note summarises the MD3310 activity. The goal was to measure the complex tune shift as a functi...
This report summarizes the results of the backup activity performed after cancellation of the MD1787...
The LHC at CERN was designed to accelerate proton beams from 450 GeV to 7 TeV and collide them in fo...
The MD was devoted to studies of longitudinal beam stability on the flat bottom and during the ramp ...
The availability of the LHC machine was adversely affected in 2017 by tens of beam aborts provoked b...
This note summarises the measurements and observations performed during the LHC Machine Development ...
The PSB was conceived as an intensity booster for fixed-target physics. Consequently, no attempt wa...
On 25 July 2018 partially stripped lead ions with one remaining electron (208Pb81+) were injected, a...
This note summarizes three inter-related machine development sessions that were performed in the LHC...
Long lasting dipole oscillations have been observed at injection in the LHC, with 50 ns bunch spacin...
This note summarizes the results obtained at injection during the 2nd MD block and the floating MD b...
The aim of the MD was to measure the coupled-bunch stability from all HOM impedances, with a reduced...
Losses at injection depend on the beam quality in the longitudinal and transverse plane in the injec...
The aim of the MD was to study the controlled longitudinal emittance blow-up applied during the ramp...
The goal of this MD was to study a single bunch longitudinal instability observed during the acceler...
This note summarises the MD3310 activity. The goal was to measure the complex tune shift as a functi...
This report summarizes the results of the backup activity performed after cancellation of the MD1787...
The LHC at CERN was designed to accelerate proton beams from 450 GeV to 7 TeV and collide them in fo...
The MD was devoted to studies of longitudinal beam stability on the flat bottom and during the ramp ...
The availability of the LHC machine was adversely affected in 2017 by tens of beam aborts provoked b...
This note summarises the measurements and observations performed during the LHC Machine Development ...
The PSB was conceived as an intensity booster for fixed-target physics. Consequently, no attempt wa...
On 25 July 2018 partially stripped lead ions with one remaining electron (208Pb81+) were injected, a...