Clogging Mechanisms in Converging Microchannels

Many technological and biomedical applications ranging from water filtration and oil extraction to arteriosclerosis and vein thrombosis rely upon the transport of solids in liquids. Particulate matter suspended in liquid flowing through channels that are often microscopic or millimeters in size which leads to clogging. This dissertation examines the clogging behavior of microscopic channels by microscopic particles suspended in liquid. We physically model clogging in microchannels by flowing microparticles through microfluidic channels. Unlike previous studies, we choose non-uniform microchannels; specifically, we study clogging in microchannels whose width narrows over the length of the channel. Converging channels are inspired by the pore size variations in real porous media like membrane filters and sandstone. Initially we study the clogging behavior of microparticles in arrays of parallel microchannels as we vary the microchannel entrance (mouth) width and microchannel length. We measure the time until each channel clogs and we calculate the number of particles that pass prior to clogging. Contrary to expectation, we show that the number of particles passing through a pore increases exponentially with increasing mouth width but decreases linearly as the channel length increases. Changing the dimensions of the channels changes the particulate suspension’s flow rate which in turn changes the shear stresses that particles experience near the channel wall. When particles experience higher near-wall shear stress, the particles are less likely to adhere to channel walls and engender clogging. We confirm the effect of flow rate on channel clogging by demonstrating that the number of particles needed to clog a tapered channel increases as the pressure applied to the particulate suspension increases. The connection between flow rate and clogging highlights the interplay between hydrodynamic forces and intermolecular forces that govern particle attachment and ultimately clogging. We further explore this relationship by modulating the interaction between the particle and channel wall in a single tapered channel. While observing single channels clogging, we also resolve individual particles gradually building up on channel walls and forming clogs. Interestingly, particles also cluster on upstream channel walls only to later detach and clog at the downstream constriction. At low pressures, the channel clogs when particles accumulate individually near the constriction. At high pressures, the channel clogs when particle clusters detach from channel walls upstream and flow into the constriction. Finally, we compare the clogging behavior of particles with long, electrosteric stabilizing molecules on the surface to the clogging behavior of particles with shorter electrostatic stabilizing molecules on the surface. We also compare the clogging behavior of both particle types in the presence of varying concentrations of a monovalent salt. We show that clogging is mitigated when Debye length is comparable to the length of the stabilizing molecule on the particle’s surface.Engineering and Applied Sciences - Applied Physic