Changes on electrical resistivity were experimentally studied for polystyrene and carbon black-based composites respect to the temperature. 22% w/w carbon black composite films at 30 μm, 2mm y 1cm thick were submitted to thermal heating-cooling cycles from room temperature to 100°C, slightly up to Tg of the composite. For each cycle changes on electrical resistivity constituent a hysteresis loop that depends on the sample thickness. The changes during the heating stage could be explained as a consequence of the thermal expansion and mobility of the polymer chains at Tg, producing a disconnecting of the electrical contacts among carbon black particles and an important increasing (200%) of the electrical resistivity. For each cycle, the hyste...
peer reviewedThe electrical conductivity of carbon-black loaded polystyrene-polyisoprene blends has ...
D.C conductivity of epoxy composites was determined as a function of carbon concentration and temper...
D.C conductivity of epoxy composites was determined as a function of carbon concentration and temper...
Changes on electrical resistivity were experimentally studied for polystyrene and carbon black-based...
This paper is focus on the analysis of the electrical resistivity of polymer composites respect to t...
This paper is focus on the analysis of the electrical resistivity of polymer composites respect to t...
©2000 IEEE. Personal use of this material is permitted. However, permission to reprint/republish thi...
Carbon black/polymer composites can be used in a variety of industrial applications, ranging from te...
ABSTRACT: Several carbon blacks with surface areas from 105 to 1353 m2/g were used to produce compos...
Conductive polymer composites were prepared by sintering a mixture of ultrahigh molecular weight pol...
This presentation deals with electrical properties study of high structured carbon black/polyisopren...
The practical application of semi-conducting carbon black polymer composites often involves temperat...
The practical application of semi-conducting carbon black polymer composites often involves temperat...
Effect of carbon black on the thermoelectrical properties of poly(ethylene-oxide) composites ZM Elim...
The positive temperature coefficient (PTC) effect in polymeric composite has a variety of applicatio...
peer reviewedThe electrical conductivity of carbon-black loaded polystyrene-polyisoprene blends has ...
D.C conductivity of epoxy composites was determined as a function of carbon concentration and temper...
D.C conductivity of epoxy composites was determined as a function of carbon concentration and temper...
Changes on electrical resistivity were experimentally studied for polystyrene and carbon black-based...
This paper is focus on the analysis of the electrical resistivity of polymer composites respect to t...
This paper is focus on the analysis of the electrical resistivity of polymer composites respect to t...
©2000 IEEE. Personal use of this material is permitted. However, permission to reprint/republish thi...
Carbon black/polymer composites can be used in a variety of industrial applications, ranging from te...
ABSTRACT: Several carbon blacks with surface areas from 105 to 1353 m2/g were used to produce compos...
Conductive polymer composites were prepared by sintering a mixture of ultrahigh molecular weight pol...
This presentation deals with electrical properties study of high structured carbon black/polyisopren...
The practical application of semi-conducting carbon black polymer composites often involves temperat...
The practical application of semi-conducting carbon black polymer composites often involves temperat...
Effect of carbon black on the thermoelectrical properties of poly(ethylene-oxide) composites ZM Elim...
The positive temperature coefficient (PTC) effect in polymeric composite has a variety of applicatio...
peer reviewedThe electrical conductivity of carbon-black loaded polystyrene-polyisoprene blends has ...
D.C conductivity of epoxy composites was determined as a function of carbon concentration and temper...
D.C conductivity of epoxy composites was determined as a function of carbon concentration and temper...