Acquisition of anion profiles and diffusion coefficients in the Opalinus Clay at the Mont Terri rock laboratory (Switzerland)

15th Water-Rock Interaction International Symposium (WRI), Evora, PORTUGAL, OCT 16-21, 2016International audienceChloride, bromide and sulphate concentration profiles have been analysed through the Opalinus Clay of Mont Terri in the framework of the Deep Borehole Experiment. Aqueous leaching and out diffusion experiments were carried out to acquire anion concentrations and estimate pore diffusion coefficients. Out diffusion technique gave consistent values of chloride and bromide compared to the concentration profiles acquired so far at the tunnel level of the Mont Terri rock laboratory. Concentrations acquired by leaching experiments show a maximum chloride concentration of 16.1 +/- 1.7 g/l at the basal part of Opalinus Clay which is higher than the value of 14.4 +/- 1.4 g/l obtained by out diffusion at the same level. This excess of chloride is likely due to dissolution of Cl-bearing minerals or release of Cl initially contained in unaccessible porosity. Bromide to chloride ratios are virtually the same as that of seawater, whereas sulphate to chloride ratios are significantly higher. Those latter are probably due to pyrite oxidation and dissolution of sulphate-bearing minerals occurring during sample collection and preparation. An anisotropy ratio of 2.4 was estimated for pore diffusion coefficient in the Opalinus Clay sandy facies. (C) 2017 The authors. Published by Elsevier B.V